Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Van Nuys
A new driveway or security gate in Van Nuys typically runs $2,800 to $7,500 installed, depending on the gate style, automation, and whether we’re reusing your existing posts or setting new footings. Most standard installations take one to two days on site, and we quote the full price before any work begins. If you’re on Sepulveda or Van Nuys Boulevard and your gate has finally quit after one too many 110°F summers, call us at (925) 693-7978. We answer live, 24 hours a day.
Why Ironworks Gate Co. Is Van Nuys’s Preferred Gate Installation Company
Van Nuys has a gate problem that most installers don’t talk about: the heat. We’ve been working the San Fernando Valley long enough to know that an operator rated for 90°F coastal weather will cook itself by August on Van Nuys Boulevard. Victor Salinas, who leads our team, has spent years matching operators and anchors to the Valley’s specific thermal load. That’s why we stock heat-rated motors and heavy-duty hinges in our Los Angeles office, ready to dispatch to Van Nuys when a gate fails mid-swing. Homeowners here have learned the hard way that a gate is only as good as the person who sized it for the climate. We size it right the first time. Our technicians are background-checked, uniformed, and they show up when we say they will. Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, we come back and make it right. No arguing, no paperwork. That’s the deal.
Our Gate Installation Services in Van Nuys
We install and upgrade every type of gate you’ll find across Van Nuys, from the iron driveway gates on the post-war bungalows in 91401 to the heavy commercial slide gates along Sepulveda’s fleet yards.
Sliding Gate Installation
Sliding gates make sense on Van Nuys lots where a swing gate would arc into the street or block a driveway. They ride on a track or cantilever system, and the flat Valley floor actually works in your favor here. We set new posts, run the track, hang the panel, and wire the operator. We also install bottom tracks and rebuild sagging panels so a gate that’s been dragging for years rolls clean. On one Sepulveda fleet yard, we replaced a 1970s tubular-steel slide gate whose original rack and pinion had stripped teeth from three decades of 50-cycle days and heat-hardened grease. We re-cored the hinge post footing, installed a Viking operator with a UL 325 safety photocell, and brought the sagging panel back to plumb with a new bottom track. That’s what an installation should do: end the fight.
Driveway Gate Installation
Most driveway gates in Van Nuys are either swinging or sliding, with an operator that hasn’t been upgraded since the house was built. We install new steel and aluminum driveway gates, set posts to withstand the Valley’s thermal cycling, and match the operator to the gate’s weight and cycle count. If you live in a 1950s ranch in 91404, your gate probably hangs on original hinges that have corroded from decades of dry heat and morning marine haze. We replace those before they fail. The point is a gate you open and close every single day without thinking about it. For a full picture of what’s involved, see our Gate Installation team’s process.
Security Gate Installation
Van Nuys has a high density of rental properties and commercial buildings, and security gates are not a luxury here. We install pedestrian and vehicle security gates with keypads, intercoms, and access control, sized for the actual abuse they’ll take. A security gate on a 30-unit apartment building in 91405 cycles dozens of times a day. That’s a different animal than a homeowner’s driveway gate. We spec commercial-grade operators and reinforced frames so it doesn’t collapse in month three. When you call us, you’re talking to a live person who can dispatch to Van Nuys the same day for emergencies.
Swing Gate Installation
Swing gates are the classic choice for the stucco bungalows and small apartment courts across Van Nuys. We install single and double swing gates, set the posts deep, and hang the panel so it clears the ground year-round. Daily thermal cycling on the Valley floor warps tubular-steel frames and pulls concrete-set anchorage out of plumb, which causes the bind at the hinge post that so many Van Nuys homeowners describe as “the gate just won’t close anymore.” We fix that by setting posts below the frost line and anchoring them with heat-stable concrete. The gate shouldn’t fight you in July. It won’t.
Double Gate Installation
Double gates are common across 91401 and 91405, where driveways are narrow but wide enough for two leaves. The math changes: two hinges, two catch posts, a center drop rod, and an operator that has to push twice the leaf weight. We’ve installed and rebuilt enough double gates in Van Nuys to know where the failures happen: usually the center stop and the bottom hinge on the slave leaf. If your double gate sags in the middle after a Santa Ana blows through, that’s not normal wear, that’s a hinge that was undersized for the load. We correct that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
We service and install LiftMaster, FAAC, and Elite operators, among others, and we keep common parts stocked for Van Nuys customers so we’re not waiting on a distributor when your gate is down. A burned-out control board on a LiftMaster from a 108°F afternoon shouldn’t mean a week without a gate. It shouldn’t mean even a day. If it’s in our stock, we bring it the same visit. If it’s an older Elite or Mighty Mule, we can usually cross-reference or rebuild it. Every operator goes in with the proper thermal protection for the Valley floor, not whatever was in the box from a coastal supplier.
Common Gate Installation Problems We See in Van Nuys Homes
- 1970s operators seizing on hot afternoons. Original operators from the 1970s were never built for 110°F ambient heat, and they overheat and seize mid-travel, leaving a gate stuck open or closed on the hottest days of the year. The fix is usually a new operator with a higher thermal rating, not another patch job.
- Warped tubular-steel frames. Daily thermal cycling, hot days and cool nights, slowly twists lightweight steel frames over the years. A gate that bound at the hinges in August probably didn’t do that when it was first hung.
- Pulled anchor posts. Concrete set shallow in dry, shifting Valley soil doesn’t hold like it does in other places. Posts drift out of plumb, and the gate starts scraping or refusing to latch. We reset the post and re-core the footing.
- Santa Ana wind damage. Fall winds funnel through the Valley with real force. We’ve seen older slide gates blown clean off their tracks, and obstruction sensors tripped so often the motor finally burned out overnight. A wind-rated track and a properly shielded sensor array prevents this.
Pricing for Gate Installation in Van Nuys, CA
We Also Serve Cities Near Van Nuys
Our Van Nuys crews also cover Panorama City, Sherman Oaks, North Hollywood, and Studio City. If you’re just over the line into Sherman Oaks or a block into Panorama City, you’re still in our service area for Gate Installation in Van Nuys. Same crews, same 90-Day Done Right Promise.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Van Nuys
Can my 1970s Van Nuys swing gate be retrofitted with a modern operator, or should I replace it?
Most 1970s swing gates can be retrofitted with a modern operator if the frame and hinges are still sound. If the gate is warped from decades of thermal cycling, retrofitting a new operator onto a bent frame will just burn the motor out faster. We’ll tell you honestly which side of the line your gate is on. Call (925) 693-7978 for a free assessment.
Why does my gate operator overheat in summer but work fine in winter?
Because Van Nuys afternoons in summer run 108°F to 115°F, which pushes the operator’s internal temperature past its thermal protection threshold. It works fine in January because ambient heat is 50°F lower. A new operator with a heat-rated transformer and proper ventilation fixes it. We spec them that way from day one.
Do I need a safety photocell for my new sliding gate in Van Nuys?
Yes. Any new sliding gate with automation requires a UL 325 listed safety photocell and a secondary entrapment protection device, like a reversing edge. It’s a safety requirement, not an upsell. We install them on every automated gate we touch.
How do Santa Ana winds affect my gate operator in the 91405 ZIP?
Santa Ana winds funnel through the Valley with enough force to blow a sliding gate off its track, and when the gate gets knocked out of alignment, the obstruction sensor trips repeatedly until the motor overheats and dies. A wind-rated track system and a properly shielded sensor prevent most of these failures. If your gate came off its track last fall, call us before the wind season starts again.
Should I replace a sagging gate panel or just the hinge post in Van Nuys?
If the panel is straight and the hinges are in good shape, resetting the post is usually enough. If the frame itself has sagged from years of heat cycling, replacing just the post is throwing money at half the problem. We’ll measure the panel’s plumb and tell you the honest answer. That’s why we offer a free second opinion on any written estimate.
Get Your Van Nuys Gate Installed the Right Way
Call us at (925) 693-7978 for a free estimate. We answer live, day or night, and we’ll schedule a time that works for you. You’ll get a written price before any work begins, and every job is backed by our 90-Day Done Right Promise. That’s how we’ve done it in Van Nuys, and that’s how we’ll keep doing it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Van Nuys and the surrounding San Fernando Valley.