Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tujunga
Gate parts and welding in Tujunga isn’t a handyman job. The canyon winds off Big Tujunga Canyon Road, the fire-zone access codes, the long gravel driveways cutting up hillside lots off Foothill Boulevard, the original 1940s ornamental iron that’s been holding since before the 210 Freeway existed. We know what fails here and why it fails. That’s what this page is about. If your gate sags, binds, drags, or won’t hold a latch, call (925) 693-7978 and talk to a live person who actually welds for a living. If the problem is a tired hinge or a cracked post footing, we’ll tell you straight.
Why Ironworks Gate Co. Is Tujunga’s Preferred Gate Parts & Welding Company
Victor Salinas founded Ironworks Gate Co. in 1984, and for over 42 years we’ve done exactly one thing: gates. Driveway gates, estate gates, swing gates, slide gates, solar gates on off-mains ranch entrances. Not fences on the side. Not gates as a side hustle. Our Gate Parts & Welding team carries what Tujunga actually needs: heavy barrel hinges, weld-in hinge posts, rack and pinion rail sections, roller assemblies for wide slide gates, and the fire-department-compatible release hardware that this specific hillside community codes for.
We’re not the cheapest quote in Tujunga, and we’re comfortable saying that. Our customers aren’t looking for the lowest bid on a hinge swap. They’re the homeowners who’ve lived on Hillrose Street or Tinker Avenue for twenty, thirty years, who remember the last contractor who promised a two-hour fix and left a gate dragging for six months. They want it done once, correctly, with a written guarantee. That’s the job we take.
No estimator with a clipboard and a sales script. A uniformed, background-checked technician comes out, puts a level on the post, and tells you what’s actually wrong. We price the work before we touch a bolt, and every job is backed by our 90-Day Done Right Promise in writing. No paperwork, no arguing. If it’s not right, we come back and make it right.
Our Gate Parts & Welding Services in Tujunga
Hinge Replacement
Tujunga’s canyon-funneled Santa Anas put more lateral load on gate hinges than almost any flatland neighborhood in the San Fernando Valley. We see bent hinge pins, wallowed-out hinge cups, and snapped leaf plates on gates all over the hillside streets off McGroarty Street and Apperson Street. We replace them with heavier barrel hinges than the original spec, welded or through-bolted depending on the gate’s frame condition. A hinge replacement that only swaps the pin and calls it done won’t survive the next wind event.
Post Replacement
The most common structural failure we find in Tujunga is a hinge post rotted or fractured at the footing, or heaving out of a crumbling hillside footer during winter rain. A sagging post drops the gate, which binds the latch, drags the panel, and eventually wrecks the hinges. We dig the old footing, pour a new one to proper depth for the soil, and weld in a new steel hinge post. It’s dirt work, concrete, and welding in one job. Post replacement in Tujunga typically runs $450 to $1,100 depending on post size, footing depth, and whether old concrete has to be jackhammered out.
Rail Repair
Long driveway rail sections, especially on rack-and-pinion slide gates, take abuse from more than just wind. Gravel driveways off Tujunga Canyon Boulevard constantly kick decomposed granite and road dust onto the track. Add ash after fire season and the rollers jam, which makes the rack teeth skip and wear unevenly. We straighten bent rail, weld in replacement sections, reset track supports, and swap out worn rack sections so the gate travels smooth and quiet again. If we see ash buildup in the rack, we’ll tell you and clean it out. That’s part of the job here.
Custom Welding
Tujunga has a lot of ironwork that predates modern gate hardware. Original 1940s and 1950s ornamental wrought-iron drive gates, hand-formed scrolls, hand-drawn designs, hand-set hinges. When those fail, you can’t just buy a replacement panel at a big-box store. We weld. We repair cracked scrollwork, rebuild snapped pickets, sister in steel behind rotted portions, and match the original ornamentation as closely as the material allows. In many cases, a good welder can save a 40-year-old gate and make it close like the day it was hung. Custom welding work in Tujunga generally runs $180 to $650 depending on scope, with a minimum service charge for a single visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tujunga
We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for DoorKing, Viking, and Ghost Controls because those are the three we see most often on Tujunga hillside drives, especially solar-powered units on off-mains ranch gates. Dispatched from our Los Angeles office, our Tujunga crews carry parts for same-visit repairs on most common failures. No “we’ll order it and come back in two weeks.”
Common Gate Parts & Welding Problems We See in Tujunga Homes
- Rack and pinion slide gates jamming on long gravel driveways. After a fire season, fine ash and decomposed granite pack into track rollers and rack teeth. The motor strains, the gate stutters and then stops halfway, and eventually the rack teeth wear unevenly and need replacement.
- Hinge posts heaving out of hillside footings. Winter rain into already-loose hillside soil around Big Tujunga Canyon makes gate posts crawl and tip. A gate that sags half an inch binds the latch; a gate that sags an inch and a half stops opening entirely.
- Solar gate operators dead after wind and ember events. Vented motor housings fill with ember debris during windy fire conditions, then control boards short out during heavy use in evacuation-and-return cycling. This failure pattern is essentially unknown in Burbank or Glendale flatlands; in Tujunga, we see it after every active fire season near the Angeles National Forest.
- Aging ornamental ironwork with decades of UV and rust. Tujunga’s 1940s-1970s ranch homes and bungalows often have original ornamental gates that have never been upgraded. Cracked scrollwork, rotted hinge posts, and rusted-through pickets are the norm, not the exception.
Pricing for Gate Parts & Welding in Tujunga, CA
You should know what this costs before you call. Hinge replacement in Tujunga typically runs $180 to $420, depending on gate weight and how many hinges are involved. Post replacement runs $450 to $1,100 with new footing. Rail repair jobs are usually $300 to $750, and custom welding ranges from $180 to $650. The widest single variable is access: some hillside driveways off Big Tujunga Canyon Road require a crew to hand-carry the welder and tools up a slope, and that takes longer. We always quote the full price and agree on it before any work starts. Estimates are free. Call (925) 693-7978 and we’ll give you a real number, not a range and a shrug.
We Also Serve Cities Near Tujunga
Our crews run regular routes into Burbank, Sun Valley, Glendale, and North Hollywood. If you own a rental or a second property just over the hill, the same Gate Parts & Welding in Tujunga team handles it. Call the office and Nadia or whoever answers will route the right truck your way.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tujunga
Yes. Tujunga sits inside a designated Very High Fire Hazard Severity Zone, and Los Angeles fire-access code requires emergency responder entry capability on automated driveway gates. That usually means a Knox-Box, a fire-department-compatible key switch, or a similar release mechanism installed so firefighters can open the gate with their own equipment. Flatland San Fernando Valley contractors rarely encounter this requirement; we deal with it on almost every automated gate we touch in Tujunga. Call (925) 693-7978 and we’ll tell you what your gate actually needs to be code-compliant.
Sometimes, but more often it’s a debris issue. Santa Ana winds channel through Big Tujunga Canyon and fire ember debris and dust directly into vented solar operator motor housings. When the gate gets heavy use during an evacuation-and-return cycle, the control board shorts out. The welding comes in when the same wind has bent a hinge pin or racked a frame panel, which puts extra load on the operator and makes the electrical problem worse. We fix the structural piece and the operator piece in one visit. Call (925) 693-7978 for a free estimate.
Long gravel driveways off roads like Tujunga Canyon Boulevard or Foothill Boulevard constantly deposit decomposed granite and road dust onto slide gate track rollers. The rollers fill, the gate drags, and the drive chain or rack teeth skip under load. If the track supports are welded to a shoe or plate that’s loosened, the whole gate can walk off the rail. We replace worn rollers, clean and reset the track, and re-weld support plates where they’ve pulled loose. Depending on damage, that’s a $300 to $750 job in Tujunga. Call (925) 693-7978 and describe the symptom - we can usually tell you over the phone whether it’s rollers, rack, or track.
We can usually repair it, and we’d rather. Tujunga’s older ranch homes and hillside bungalows have ornamental iron gates you can’t replace with a catalog product - the scrollwork, the proportions, the hinge details are from another era. We weld cracked scrollwork, scab in steel behind rusted sections, and rebuild snapped pickets. If the gate has sagged, the cause is usually a deteriorated hinge post, and we can replace that post and re-hang the original gate. We’ll only recommend full replacement when the iron is so rusted that new welds won’t hold. A free estimate will tell you which path you’re on.
Yes, the control board is replaceable on every major brand we service, including DoorKing, Viking, and Ghost Controls. After active fire seasons near Big Tujunga Canyon, we see a wave of Tujunga calls where fine ash worked into motor housings during smoky conditions, then shorted control boards during heavy evacuation-and-return use. We’ll replace the board, clean the motor housing properly, and in most cases add a simple pre-filter or gasket improvement that keeps the same failure from repeating. Call (925) 693-7978 - estimates are free.
Call Ironworks Gate Co. for Gate Parts & Welding in Tujunga
A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail, not a callback queue. You’ll get a straight answer about your Tujunga gate, and an honest price if you want us to look at it. We’ve been at this for over 42 years, and we intend to keep doing it for another forty. Call (925) 693-7978 for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tujunga and the surrounding hillside communities since 1984.