Linear Gate Access Control Nationwide

Linear Gate Access Control in North Hollywood: What to Know First

We repair and install Linear gate access control systems throughout North Hollywood, usually in one visit. Most keypad, remote, and phone entry issues on Linear systems run between $180 and $450 with the price agreed before we turn a single bolt. As an independent Linear service provider, we work on every access control product Linear has made for residential gates over the past 25 years.

Call (925) 693-7978

If you own a Linear gate opener with a keypad or entry system that’s acting up, this page tells you what’s actually going wrong and what it costs to make it right. Call (925) 693-7978 and a live person answers, day or night.

How Linear Products Fail - and How We Fix Them

Linear builds solid hardware, but every brand has its weak points. These are the failure modes we see most often on North Hollywood driveways:

• MegaCode receiver drift on older APeX and LDO-series openers. Linear’s MegaCode rolling-code system is generally reliable, but receivers made before roughly 2008 sometimes lose their code memory entirely. The gate works fine from the wall button, but remotes and keypads stop responding. We re-flash the receiver or replace it with a current unit, then reprogram every remote in the driveway.
• Linear keypad failure from sun and heat. The AM-KP and MGT series keypads use a membrane face that hardens and cracks after six or seven years of Valley sun. The keypad still looks fine but registers nothing when pressed. We swap in a newer Linear or compatible keypad, wire it properly, and seal the connection against our dry-season dust.
• Phone entry board failure on the AE-1000 and AE-2000 units. These grant access through a phone line or cellular connection, and the boards are sensitive to voltage spikes. A close lightning strike or a power surge from LADWP switching will knock them out even though the gate motor itself is fine. We diagnose the board separately from the operator and replace only what failed.
• Card reader and video intercom incompatibility on mixed systems. We run into North Hollywood homes where a Linear card reader was paired with a non-Linear operator by a previous handyman. The reader works, but the relay output doesn’t match the operator’s input. We sort out the wiring logic, set the correct dry-contact configuration, and get the system talking on the first visit.
• Actuator arm and limit switch wear on Linear swing gate operators. The Linear SW series swing arms work hard on heavy iron gates. When the limit switches drift or the arm bushings wear, the gate stops halfway or refuses to close fully. Some techs replace the whole operator. We replace the $40 limit switch first, because that’s usually all it needs.

Our Linear Gate Access Control Process

Every Linear job follows the same path, whether it’s a dead keypad or a full phone entry system:

1. 1
   You call (925) 693-7978. A live person answers and asks what the gate is doing. We schedule a visit that works for you, not just for us.
2. 2
   We diagnose on site. Our technician checks the access control unit, the wiring to the operator, and the operator itself. Linear failures often look like motor problems and turn out to be a $60 relay, or vice versa. We find the root cause before quoting anything.
3. 3
   You get a written price before any work. No surprises, no add-ons. If the fix is simple, we tell you that plainly and charge for a simple fix.
4. 4
   We make the repair with the right parts. For warranty-sensitive components like receivers and boards, we use genuine Linear parts. For wear items like keypad housings and relay modules, we’ll use a quality aftermarket part when it saves you real money without cutting corners.
5. 5
   We test everything twice. Every remote, every keypad code, every phone entry sequence, every safety edge. The gate opens when it should and stays closed when it shouldn’t.
6. 6
   You get the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing.

What Linear Gate Access Control Costs in North Hollywood

Here’s what Linear access control work typically runs in our area:

• Keypad replacement (Linear AM-KP or MGT): $180-$320 installed
• Receiver board repair or replacement: $220-$380
• Phone entry system repair (AE-1000/AE-2000): $250-$600 depending on the board
• Card reader installation: $350-$700 including wiring and programming
• Video intercom installation: $900-$1,800 depending on monitor placement and wire runs
• Full access control replacement (new keypad, receiver, remotes): $500-$900

What moves the number: whether the existing wiring is salvageable, whether you want phone or video entry added to the system, and how far the keypad sits from the operator. Every job includes a free estimate, and the price we quote is the price you pay. Call (925) 693-7978 and we’ll come measure and price it in person.

Why North Hollywood Homeowners Call Ironworks Gate Co. for Linear Work

We’ve been fixing gates in this part of the Valley for over 42 years, and Victor Salinas grew up a few blocks from here, off Lankershim. He learned the trade watching the metal shops along the boulevard and came back to North Hollywood after trade school to spend four decades getting every gate system this city throws at a person to work right.

Our techs work on Linear every week, not once a season. And when a Linear unit is genuinely beyond saving, we can speak plainly to that too, because we’re also trained on LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. So you get a straight answer about whether to repair or replace, not a sales pitch. Every job is backed by the 90-Day Done Right Promise in writing, and we answer the phone around the clock. A gate should open when you need it to and stay closed when you don’t. Everything else is just the work.

FAQs