Ghost Controls Gate Parts & Welding Nationwide

Ghost Controls Gate Parts & Welding in North Hollywood: What to Know First

We provide independent Ghost Controls gate parts and welding in North Hollywood, with most hinge, post, roller, and latch repairs completed in a single visit. Pricing is quoted and agreed before any work starts, so the bill never surprises you. If your Ghost Controls gate won’t stay plumb, drags on the rail, or the post has pulled loose from the driveway, call (925) 693-7978 for a free estimate.

Call (925) 693-7978

This page is for North Hollywood homeowners who own a Ghost Controls opener and need the steel under it repaired right. Ghost Controls builds a solid residential swing and slide motor. The weak point on most Ghost Controls gates isn’t the motor. It’s the hinges, posts, rails, and hardware that carry the gate itself, and that’s the work we do every day. Victor Salinas has been welding and fitting gate steel in the Valley for over four decades, and the crew at Ironworks Gate Co. has been at it since 1984. We service Ghost Controls alongside LiftMaster, Mighty Mule, DoorKing, and the other major brands, so we know exactly how this equipment behaves on a North Hollywood driveway.

How Ghost Controls Products Fail - and How We Fix Them

A Ghost Controls opener keeps working long after the gate it’s bolted to starts to fail. Here is what we actually see on North Hollywood properties.

• Sagging swing gates on the R series (R30, R40, R41): Ghost Controls R-series openers are linear arms that push and pull a swing gate. They are rated for a gate that hangs square. When the top or bottom hinge wears, the gate drops a half inch and the arm starts fighting its own geometry. The opener labors, the arm bushing wears out, and the motor eventually burns through its thermal fuse. Our fix: we weld in new hinge tabs or replace the post-mounted hinges, re-hang the gate square, then set the arm travel again so the opener is pushing a gate that actually wants to move.
• Slide gate rail welds breaking on long driveway runs: Ghost Controls slide gates (the DTP and SL series) ride on a steel rail that takes a beating. On North Hollywood driveways with settled concrete or tree roots, the rail alignment shifts, and the welds attaching the rail to the posts crack. The gate then drags on the wheels and the opener pulls unevenly. We cut out the cracked weld, re-set the rail to true, and weld it back with full penetration, then dress it so the wheels roll clean.
• Post separation on stucco-sided pillars: Here in North Hollywood, a lot of homes were built with stucco over wood-framed gate posts. Twenty years of summer heat and winter rain swells and shrinks those posts until they pull away from the gate. The Ghost Controls actuator is still bolted on fine, but it’s now pulling against a post that flexes. We pull the post back to plumb, set it with new steel anchors into the footing, and weld the hinge side to match. The opener stays aligned because the post finally stays put.
• Frozen or seized gate rollers on slide setups: Ghost Controls slide gates roll on steel wheels riding inside the track. Dirt, rust, and the dry Valley dust pack into the roller bearings until they seize. The gate then slides like a drawer with sand in it, and the opener’s limit switches trip early or late. We replace seized rollers with sealed-bearing units, clean and true the track, and set the limit switches so the gate opens and closes fully without slamming.
• Latch and lock misalignment confusing the opener logic: The Ghost Controls control board waits for a “closed” signal from the limit sensor. When the physical latch is misaligned, the gate never quite seats, and the board keeps waiting. Homeowners think the board is dead, but it’s actually a latch that’s half an inch off. We re-align or fabricate a new latch catch, weld it in place, and the board behaves again. It’s a $150 repair that a lot of companies won’t bother with, because they’d rather sell a new board for $400.

A gate should open when you need it to and stay closed when you don’t. Everything else is just the work.

Our Ghost Controls Gate Parts & Welding Process

1. 1
   You call, a person answers: 24 hours a day, 7 days a week, a live person picks up at (925) 693-7978. You tell us what the gate is doing, or not doing. We schedule a visit.
2. 2
   We come out and diagnose the whole gate, not just the symptom: A Ghost Controls gate that’s dragging is usually a hinge or rail problem, not a motor problem. We inspect the steel, the post anchors, the rollers, the latch, and the opener settings. We take notes and photos.
3. 3
   You get a straight price before we start: We quote the repair in writing and you approve it. If we find something hidden once we open it up, we stop and talk to you before doing anything beyond the quote. No surprises.
4. 4
   We do the work the right way: If it’s a weld, it gets ground back to clean steel and welded properly. If it’s a hinge, we replace the whole assembly, not just the pin. If it’s a Ghost Controls arm or bracket, we use OEM Ghost Controls parts or a proven aftermarket equivalent and we tell you which one it is and why.
5. 5
   We test the full cycle with the opener: We set the travel limits, the force sensitivity, and watch the gate run through ten full cycles. If the opener is a Ghost Controls unit, we configure it the way Ghost Controls intended it to run.
6. 6
   You get the 90-Day Done Right Promise in writing: Every job, no exceptions. If it’s not right, we come back and make it right. No paperwork, no arguing.

What Ghost Controls Gate Parts & Welding Costs in North Hollywood

Most Ghost Controls gate hardware repairs in North Hollywood fall between $180 and $900, depending on what’s actually broken. A simple latch catch runs around $180 to $250. A hinge replacement on a standard residential swing gate runs $250 to $450 per hinge. Welding a cracked rail or replacing a post runs $500 to $900. A full gate re-hang with new hinges and post anchors runs $800 to $1,400. The price is always agreed before we start, and you know exactly what the job will cost when we’re standing in your driveway.

What moves the price is steel condition, access, and whether the post itself has to come out. A gate that sags but has healthy posts is a quick re-hang. A gate whose posts are rotted or cracked at the base is a bigger job, because we have to set new anchors into the concrete. We don’t pad the bill, and we don’t quote a number then “find” more once we’re into the work. Call (925) 693-7978 for a free estimate, and we’ll give you a real number before a single bolt is turned.

Why North Hollywood Homeowners Call Ironworks Gate Co. for Ghost Controls Work

We have been welding gate steel and servicing gate automation in North Hollywood since 1984. That’s four decades of watching every brand of opener come and go, and Ghost Controls is one we know thoroughly. Our technicians are background-checked, uniformed, and trained on nine gate-automation brands, so when a Ghost Controls gate has a strange fault, we’re not guessing. And if your Ghost Controls unit is older enough that parts are discontinued, we know how to either source them or move you to a reliable setup, without pushing a replacement you don’t need.

The Ironworks difference is simple: we answer the phone, we show up when we say we will, and we back every job with the 90-Day Done Right Promise in writing. No hassling, no callbacks to nowhere. Just a gate that opens and closes the way Ghost Controls meant it to, for years. If your Ghost Controls opener is fine but the steel around it is done, call us. We fix what’s broken and leave the rest alone.

FAQs