Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Beverly Hills, CA
Gate repair in Beverly Hills usually runs between $180 and $1,400 depending on whether it’s a hinge, a weld, a motor swap, or full automation replacement, and most jobs are finished in one visit. We work on the custom estate gates that line the flats and the hillsides, and we answer the phone when you call, any hour. If your gate is stuck, off its track, groaning on the opener, or dead at the keypad, call us at (925) 693-7978 and we’ll send a technician who knows your neighborhood and your gate’s wiring before he even pulls into the driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Beverly Hills Homeowners Choose Ironworks Gate Co.
We’ve spent four decades learning what goes wrong with automated gates, and the gates in Beverly Hills are unlike almost anything else in the country. The neighborhoods north of Sunset Boulevard, the flats around Maple Drive, and the newer estates above Coldwater and Benedict Canyon all carry a particular signature: hand-forged iron, one-off steel fabrications, and automation systems tied into whole-house security and smart-home platforms. When a homeowner in the 90210 hills calls about a gate that won’t close, we’re not guessing. We’ve seen that exact failure on that grade of driveway before.
Our technicians are background-checked and uniformed, most jobs are completed in a single visit, and we quote the price before touching a single bolt. We are trained on nine automation brands: LiftMaster, FAAC, and Elite are common on Beverly Hills estates, but we carry working knowledge of Viking, Ghost Controls, DoorKing, BFT, Linear, and Mighty Mule as well. A live person answers every call, day and night. Not a voicemail tree.
Gate Repair Services We Offer in Beverly Hills
Gate Repair
A sagging gate, a bent hinge, a striker that no longer lines up, a wheel that chews into the track: these are the failures that wear a gate down. We repair the iron, re-align the leaves, and make a 40-year-old gate close like the day it was hung.
Learn more about our Gate Repair in Beverly Hills.
Gate Installation
Some Beverly Hills properties need a new gate built to match a 1920s Spanish Colonial, and others need a modern steel and glass design for a mid-century hillside home. We measure, fabricate, install, and automate, with the same written guarantee we put on every job.
Learn more about our Gate Installation in Beverly Hills.
Gate Motor & Opener
When a motor strips its gears or an opener loses its travel limits, the gate either grinds or refuses to move. We repair and replace operators, arms, and circuit boards, and we know the proprietary wiring on systems installed by other companies.
Learn more about our Gate Motor & Opener in Beverly Hills.
Gate Access Control
Keypads, video intercoms, license-plate readers, and Crestron or Control4 tie-ins are standard on Beverly Hills estates. We integrate with the existing system rather than ripping it out, which keeps the gate working with the rest of the property’s security.
Gate Parts & Welding
Bespoke hardware fails in bespoke ways. We weld, we fabricate, we source Beverly Hills Gate Parts & Welding expertise, and when a 90-year-old iron scroll finally gives way, we repair it in place or reproduce it to match. No part is too odd.
Neighborhoods We Serve in Beverly Hills
We cover every zip code in the city: 90209, 90210, and 90211. That includes the flats below Santa Monica Boulevard, the estates along Roxbury and Alpine, the hillside properties above Sunset, and the newer builds near Trousdale Estates. Typical response time across Beverly Hills is same-day for urgent repairs, next-day for scheduled work.
- Trousdale Estates (90210)
- Beverly Hills Flats (90211)
- Benedict Canyon (90210)
- Coldwater Canyon (90210)
- Maple Drive corridor (90211)
Why Beverly Hills’ Climate & Housing Affect Gate Repair
Beverly Hills sits close enough to the coast that the morning marine layer leaves a film of moisture on exposed iron tracks and pivot hardware. That film is persistent in the 90211 flats, where 1920s and 1930s Spanish Colonial gates carry original ornamental iron that has been retrofitted with operator after operator over the years. The wiring is layered, the hardware is mixed, and the rust finds its way in. North of Sunset, where the lots climb steeply, gates are heavier, the arms work harder, and balance has to be right to the inch. Then the Santa Ana winds arrive in the fall, dry and sudden, slamming unsecured gates off their travel limits and stripping gears. It is a seasonal one-two that keeps gate repair demand high here, and we plan around it.
Pricing for Gate Repair in Beverly Hills
- Gate alignment & hinge work: $180-$420
- Gate motor replacement (operator swap): $650-$1,400
- Access control repair / keypad replacement: $220-$550
- Welding & custom iron repair: $300-$900
- Full gate automation install: $1,800-$4,500
Every price is quoted and agreed before any work starts. That is the square deal. No surprises on the bill. Call (925) 693-7978 for an exact quote.
Service Area - Cities Near Beverly Hills
We serve Beverly Hills and the surrounding area, including West Hollywood, Studio City, Sherman Oaks, and North Hollywood. If your property sits just outside the city line, call us and we’ll let you know if we cover your street.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well, West Hollywood, CA included. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Beverly Hills
For urgent repairs we typically arrive same-day, and we carry common parts on the truck. Most repairs are finished in a single visit. If your gate is stuck open or won’t close and you need it secure tonight, call us at (925) 693-7978.
For a motor replacement or any modification to an automated gate, the City of Beverly Hills Building & Safety department can require a permit and inspection, and enforcement here is stricter than in surrounding unincorporated areas. We handle the permit step correctly so you don’t get a stop-work order.
Most repairs land between $180 and $1,400 depending on the part and the automation involved. The price is quoted and agreed before we start. Call (925) 693-7978 for a free estimate.
Yes. Beverly Hills estates often run Crestron, Control4, or a video intercom system tied to the gate. We integrate with what you already have rather than tearing it out. Our technicians are trained on nine opener brands, including LiftMaster, FAAC, and Elite.
Yes. Welding and custom iron repair is a core part of what we do. We reproduce scrollwork and replace rusted sections in place, and we treat the repair so it does not rust through again next wet season.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Studio City, CA, Beverly Hills and surrounding communities.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"A hydraulic arm was leaking fluid onto the driveway. Replaced, cleaned the stain as best he could, and it has been dry since."
- Erin Sutton"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker