FAAC Gate Access Control Nationwide

FAAC Gate Access Control in North Hollywood: What to Know First

FAAC gate access control repair in North Hollywood is work we handle regularly, and most FAAC keypad, receiver, and board issues are diagnosed and fixed in a single visit. We are an independent FAAC service provider, not a factory shop, which means we stock the parts that actually fail on North Hollywood driveways and quote a firm price before any work begins. If you have a FAAC gate that will not open from the keypad or remote, call (925) 693-7978 and a live person answers, day or night.

Call (925) 693-7978

This page is written for homeowners in North Hollywood and the surrounding Valley who own a FAAC gate system and want straight answers about what fails, what it costs, and how fast it can be fixed. No manufacturer speak, no runaround. Victor Salinas and our techs have worked on FAAC systems across this city for decades, and what follows is what we actually see in the field.

How FAAC Products Fail - and How We Fix Them

• FAAC E124 and 400 Series control boards losing keypad memory. The most common FAAC access control complaint we hear in North Hollywood is a keypad that suddenly stops recognizing codes. On the E124 and older 400-series boards, the memory chip loses its settings when the board takes repeated voltage dips, which happens often on older Valley electrical services. We reflash or replace the board depending on age, re-enter your codes, and confirm the fix at the keypad before we leave.
• FAAC 455 D and 390 operators ignoring remote signals. These operators use a plug-in receiver module, and the receiver socket is a known weak point, especially after years of afternoon heat radiating off the column. The symptom is simple: the keypad works but every remote in the house went dead. We replace the receiver module, repin the connector if the socket has loosened, and retrain the remotes. No reason to replace a good operator over a $90 receiver.
• FAAC XT2 and S600 series photo eye faults killing access commands. FAAC’s newer logic boards treat a dirty or misaligned photo eye as a hard fault, so the entire access system refuses the open command even though nothing is wrong with the keypad. In North Hollywood, dust from the 170 freeway corridor and sprinkler overspray are the usual culprits. We clean and realign the eyes first, check the wiring, and only then look at the board. This is the fix most FAAC owners never hear about, because the manufacturer manual stops at “check obstruction.”
• FAAC keypad housings cracking at the mounting ears. The FAAC keypad enclosure is weather-resistant but the plastic mounting ears are not forgiving, and on steel posts they crack after a few years of sun and someone leaning a trash bin against them. We fabricate a stainless mounting plate when we replace these, which keeps the new keypad from repeating the same failure. It’s a small thing, but it’s the difference between a keypad that lasts three years and one that lasts ten.
• Aftermarket receiver modules causing intermittent faults. We have seen a handful of FAAC gates in North Hollywood that only failed when a certain neighbor’s remote was near the property. Cheap aftermarket receivers can drift off frequency. We replace them with factory FAAC receivers or a quality shielded equivalent, and the ghost failures stop. If the problem is a failing onboard receiver on an older FAAC board, we add a standalone receiver rather than replace a $600 logic board for a $40 fault.

Our FAAC Gate Access Control Process

1. 1
   You call, a person answers. Not a voicemail tree. We ask what the gate is doing, what brand is on the arm, and whether access control is keypad, remote, intercom, or all three. We give you a straight service window.
2. 2
   We arrive and test every access point. Keypad codes, remotes, phone entry, card readers, video intercom buttons. We do not guess and swap parts. We measure what is actually receiving signal and what is not.
3. 3
   We price the fix before the work. You hear the number and approve it before a single bolt is turned. Always. If we see a repair option using a quality aftermarket part, we say so and tell you the warranty difference.
4. 4
   We make the repair. OEM FAAC parts when required for warranty safety and longevity, quality aftermarket when it makes better sense for an older system. We mount, wire, seal, and label everything so the next tech, even if it’s not us, can see what was done.
5. 5
   We test it the way you use it. Not just once from our truck. Keypad from the street, remote from the driveway, intercom from inside the house. Then we cycle the gate ten times while watching the limit stops.
6. 6
   You get the 90-Day Done Right Promise in writing. If anything about the access control fix is not right, we come back and make it right. No paperwork, no argument. That is the Keystone Standard on every single job.

What FAAC Gate Access Control Costs in North Hollywood

Here are the ranges we quote on FAAC access control work in this city, parts and labor included:

• FAAC keypad replacement (factory housing, programmed, tested): $265-$420
• FAAC receiver module replacement (remotes retrained): $180-$310
• FAAC control board repair or replacement (E124, 400 series, XT2): $390-$750
• Photo eye replacement and alignment (pair): $190-$320
• Full access control retrofit on an existing FAAC operator (keypad, receiver, new remotes): $780-$1,250

What moves the price is age. A 15-year-old FAAC board that is no longer made costs more to source, and sometimes the honest answer is a modern replacement regardless of what we put in. You will always hear that honesty from us, along with the number, before we touch the gate. Estimates are free. Call (925) 693-7978 and we will quote the job over the phone when we can, or schedule a visit when we need eyes on it.

Why North Hollywood Homeowners Call Ironworks Gate Co. for FAAC Work

A gate should open when you need it to and stay closed when you don’t. Everything else is just the work. Around North Hollywood, our name gets passed between neighbors for one reason: we show up when we say we will, and the FAAC fix we make stays fixed. We have been in this business since 1984, and Victor Salinas still treats a keypad repair on a 1970s swing gate with the same care as a full access system on a new estate.

We are trained and equipped on nine automation brands, so if your FAAC system is beyond a sensible repair, we can tell you straight and show you the alternatives from LiftMaster, Mighty Mule, Ghost Controls, or DoorKing. But most of the FAAC gates we see in North Hollywood are worth fixing, and that is exactly what we do. Done right, and backed in writing for 90 days.

FAQs