FAAC Keypad & Intercom Repair Nationwide

FAAC Keypad & Intercom Repair: The North Hollywood Owner’s Guide

FAAC keypad and intercom repair in North Hollywood typically runs between $220 and $590 installed, depending on whether we’re replacing a worn keypad membrane, a failed intercom board, or the entire entry station. Most FAAC keypad and intercom jobs we handle in North Hollywood are completed in a single visit, and we stock the common repair parts on our trucks so you’re not waiting on a backorder. What owners usually notice first is a keypad that works intermittently, buttons that need to be pressed hard or multiple times, or an intercom that buzzes but won’t carry voice.

Call (925) 693-7978

Which FAAC Models This Applies To

We repair and replace keypads and intercoms across the FAAC entry-line range you see on North Hollywood driveways: the older 404 and 412 operator panels, the 455 D control boards, and newer FAAC E024U and E124 systems. The compatibility gotcha most owners run into is that FAAC changed the keypad ribbon connector between the older analog keypads and the current digital ones, so a keypad pulled from one generation will not always talk to the control board of another. If you can read the model sticker on the inside of the housing, or send us a photo of the board, we’ll match the right part before we come out.

On the OEM versus aftermarket question: for FAAC keypads and intercoms specifically, we recommend OEM parts where they’re still available. FAAC entry stations are built around odd-size faceplates and proprietary wiring, and the aftermarket equivalents are often slightly wrong on the mounting holes or the button spacing. When a FAAC part is discontinued, we keep a rotating stock of tested used pulls and we’ll tell you plainly if that’s what makes sense for your system. Ironworks Gate Co. is an independent gate service company, not a FAAC dealer, which means our only interest is the part that fits your driveway, not the part FAAC happens to be pushing this quarter.

Signs Your FAAC Keypad & Intercom Repair Is Failing

• Buttons that need multiple hard presses. The tactile switches under the membrane wear out after years of afternoon sun on a North Hollywood gate, and once the carbon contact is flattened, no amount of cleaning brings it back. This is the single most common FAAC keypad failure we see.
• Keypad works in the morning but dead by afternoon. That shift means the keypad’s internal voltage regulator is drifting with heat, a classic failure on older FAAC analog keypads mounted on west-facing stucco walls.
• Intercom hums or crackles but no voice comes through. Usually a failed electrolytic capacitor on the intercom audio board, a ten dollar component that takes a trained hand about an hour to pull and replace.
• Gate opens from the keypad but not the intercom, or vice versa. When one input channel works and the other doesn’t, the issue is almost never the wiring, it’s a dead relay channel on the FAAC board itself. We test both channels on every call so you’re not paying for a second visit in six months.
• Ghost operation, or the gate opens on its own. A keypad with moisture intrusion behind the faceplate can short the trigger line and send the gate into an open state. In North Hollywood’s winter rain months, we see this on unsealed keypads that were mounted flush without a weather hood.

Replacement Cost & What’s Included

Here is the installed pricing we quote in North Hollywood, parts and labor together, so you know the number before we roll a truck:

• Keypad membrane or tactile button replacement: $180-$260 installed
• Full FAAC keypad unit replacement: $260-$420 installed
• Intercom audio board repair: $220-$340 installed
• Complete entry station (keypad plus intercom, FAAC-compatible): $420-$590 installed

The price drifts with the FAAC model, whether we’re repairing a board or swapping the whole unit, and whether the existing wiring is sound. Every quote is written and agreed before we turn a single screw, and every job carries our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right, no paperwork, no arguing. That’s the Keystone Standard on every FAAC job we do in North Hollywood.

DIY or Call Us?

The honest split is this: you can safely do the diagnostic half yourself. Verify the breaker hasn’t tripped, check the gate’s power LED, and note whether the keypad beeps when pressed. Those three observations save time and often tell us exactly what we’re walking into. What we don’t recommend is opening a live FAAC keypad or intercom housing and probing the board. These units run 24 volts AC from the operator and carry stored charge in their capacitors, and a slip with a screwdriver can fry the control board, which turns a $240 keypad job into an $800 board replacement. If the keypad is beeping and the gate isn’t moving, the problem is downstream in the operator, not the keypad. We’d rather you call us at (925) 693-7978 and talk it through than gamble on a diagnosis.

FAQs