A Ironworks company - serving North Hollywood, CA

Linear Gate Repair Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators
Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Linear Gate Repair in North Hollywood: What to Know First

Linear gate repair in North Hollywood typically runs $180 to $520 depending on whether it’s a control board, a limit switch, or a mechanical failure at the gate itself. Most Linear jobs are completed in a single visit, and we quote the full price before any work starts. If you own a Linear opener that’s acting up, call us at (925) 693-7978 and a live person will answer.

Call (925) 693-7978

This page is for homeowners in North Hollywood whose Linear gate system has stopped behaving. Maybe the gate opens but won’t close. Maybe it hums and does nothing. Maybe it closes halfway and reverses for no reason you can find. We’ve worked on Linear residential operators across the Valley for decades, and we’ll tell you plainly what’s wrong, what it costs to fix, and whether it’s worth fixing at all.

How Linear Products Fail - and How We Fix Them

Linear builds a solid operator, but every brand has its patterns. After years of opening the same control boxes across North Hollywood driveways, here’s what we see most often:

  • Control board relay burn-out on the LDO and LSO series: The relay that drives the motor eventually arcs and welds itself open or closed. The symptom is usually a gate that clicks but won’t move, or one that starts and stops erratically. We replace the board with an OEM unit when it’s still available, or a quality aftermarket board when it isn’t, and we set the limits and force settings to match the gate’s actual weight and travel.
  • Limit switch drift on the PRO series: Linear PRO operators use mechanical limit switches that wear over time, especially in North Hollywood’s dry, dusty summers. The gate over-travels and slams the post, or stops two feet short. We reset and lock down the limits, and if the limit nuts are stripped, we replace the limit assembly rather than letting it fail again in six months.
  • Capacitor failure on single-phase swing operators: A weak start capacitor is the usual reason a Linear swing gate groans and barely moves, or trips the breaker on startup. It’s a fifteen-dollar part that gets misdiagnosed as a bad motor more often than we’d like to admit. We test the capacitor’s actual microfarad rating under load before recommending any motor work.
  • Photo eye fault loops on the MDR and LRA series: North Hollywood sun angles and irrigation overspray play tricks on photo eyes. The gate reverses constantly because the eye thinks something is in the way. We clean, re-aim, and sometimes relocate the eyes, and we check the wiring back to the board for the corrosion that’s common in older North Hollywood installations where the conduit has been wet for years.
  • Gearbox wear on older chain-drive models: Linear’s older residential chain operators have a nylon worm gear that was designed to be the sacrificial part. When it strips, the motor runs but the chain doesn’t move. We crack the gearbox, replace the gear and grease, and inspect the chain tension and sprocket wear while we’re in there, because a misaligned sprocket is what killed the gear in the first place.

Our Linear Gate Repair Process

Every Linear job we do follows the same sequence, whether it’s a 1990s swing arm or a newer slide operator:

  1. 1
    You call, we answer: A live person picks up, day or night. We ask what the gate is doing, what model you have if you know it, and we set a window that works for you.
  2. 2
    We diagnose on-site: Our tech arrives in a marked van, confirms the model and board revision, and tests the system methodically: power input, board output, limit function, force settings, mechanical wear at the hinge or track. We don’t guess.
  3. 3
    We quote before we touch a single bolt: You’ll hear the price and what it covers before work begins. No surprises on the bill, ever.
  4. 4
    We repair using OEM or proven aftermarket parts: If Linear’s part is still in production and priced fairly, we use it. If the OEM part is discontinued or backordered, we source aftermarket components we know hold up, and we tell you which one went in and why.
  5. 5
    We test the full cycle: Open, close, obstruction reverse, photo eye interruption, manual release. We run it through at least ten cycles before we call it done.
  6. 6
    We walk you through it and put it in writing: You get a clear explanation of what failed and what we replaced, and the job is covered by our 90-Day Done Right Promise.

What Linear Gate Repair Costs in North Hollywood

Here’s what we see on most Linear repair calls in North Hollywood. These are honest ranges, not teaser prices:

  • Capacitor replacement: $110 to $190, parts and labor included.
  • Photo eye realignment or replacement: $130 to $240 depending on wiring condition.
  • Limit switch repair or reset: $150 to $260.
  • Control board replacement: $280 to $520 depending on whether you need an OEM board or the aftermarket equivalent.
  • Gearbox rebuild (chain-drive models): $340 to $480.
  • Full gate realignment with hinge work: $400 to $900 depending on gate weight and post condition.

What moves the price is parts availability, the age of your installation, and whether the wiring or the gate itself has been neglected. We’ll tell you if a repair is worth doing, and we’ll tell you plainly if a new operator makes more sense. Estimates are free, and the price you hear is the price you pay. Call (925) 693-7978 for a straight answer.

Why North Hollywood Homeowners Call Ironworks Gate Co. for Linear Work

We’ve been serving North Hollywood and the surrounding Valley for over 42 years, and we’ve seen every way a gate can fail. We’re an independent Linear service provider, not a manufacturer shop, which means we recommend the fix that’s right for your gate rather than the fix that protects a brand relationship. Our techs are background-checked, uniformed, and trained across nine automation brands, so when a Linear job turns out to be a LiftMaster control issue or a Mighty Mule retrofit that was never wired correctly, we recognize it and fix it correctly the first time. Every job is backed by our 90-Day Done Right Promise, in writing, with no fine print and no argument. And when you call, a person answers, 24 hours a day, every day. That includes 2 a.m., because gates don’t fail on a schedule.

We also carry standing offers for our North Hollywood neighbors: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.

FAQs

Need Gate Repair help in North Hollywood? Licensed & insured · 30-60 min response · free estimates
Call (925) 693-7978
Local Service Coverage

Request a Free Estimate in North Hollywood

Tell us what you need - Ironworks Gate Co. responds fast. No obligation.

By providing your information above, you acknowledge our Privacy Policy and agree that you may be contacted by telephone, text message, or email about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch