Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sun Valley
Gate installation in Sun Valley, CA typically runs $2,800 to $9,500 for a complete driveway gate with automation, with sliding gates and heavy industrial sliders landing on the higher end. If you’re looking for Gate Repair - Sun Valley instead of new installation, we handle that too. We know this market because we work it every week. Sun Valley is not Burbank. It’s not Studio City. This is a neighborhood built around Glenoaks Boulevard’s salvage yards, scrap recyclers, and warehouses, and the gates here take a beating that residential-focused shops rarely see. Our crews know the difference between a gate that looks right and one that will still cycle cleanly after its first triple-digit summer. Call (925) 693-7978 and a real person will answer, day or night.
Key Takeaways:
- Full driveway gate installations in Sun Valley run $2,800-$9,500, quoted and agreed before work begins
- We specialize in sliding gates, double gates, and security gates, the workhorses of Sun Valley’s industrial and residential mix
- Every job is backed by our written 90-Day Done Right Promise
- A live person answers at (925) 693-7978, 24 hours a day, 7 days a week
Why Ironworks Gate Co. Is Sun Valley’s Preferred Gate Installation Company
We’ve been doing this work for over 42 years, founded in 1984, and we plan to be in the San Fernando Valley for another forty. That matters in Sun Valley because the gate work here is different. The auto dismantlers along Glenoaks Boulevard, the scrap yards off Tuxford Street, the warehouses around Branford Street: these are not ornamental driveway gates. These are 20 to 40 foot dual-leaf sliding gates on heavy V-groove track systems that cycle hundreds of times a day. A company that only does residential swing gates is going to fail on that first industrial job. We don’t, because industrial sliding gates are where we spend half our working life.
Sun Valley homeowners call us for a different reason. They’ve usually owned their house since the Nixon administration, the block wall went up decades ago, and the gate that’s on there now has corroded hinges and an operator that’s been dead since the Clinton years. They don’t want a sales pitch. They want a straight answer about whether the gate can be saved or needs a full replacement. Victor Salinas leads our team, and he’s built the company on that exact conversation. Straight answer first, written price second, work done right third.
We dispatch from our Los Angeles office and crews serve Sun Valley directly. When you call, you’ll get a real person, not a voicemail tree. We’ll schedule a free measure and written estimate, and we’ll be there when we say.
Our Gate Installation Services in Sun Valley
Every Gate Installation job in Sun Valley starts with a site walk. We measure the driveway opening, check the post footings, look at the soil, and talk through how you actually use the gate. Is it the main entrance for a family, or is it a forklift crossing 200 times a day? The answer changes everything about the design. Here’s what we install most often in Sun Valley.
Sliding Gate Installation
Sliding gates are the bread and butter of Sun Valley work. On narrow lots where a swing gate would arc into a parked car or a fence line, a slider is often the only gate that fits. Industrial lots along Glenoaks Boulevard almost always need sliding gates, and we regularly install 20 to 40 foot dual-leaf sliders on heavy V-groove track systems. We set the track, pour the footings, mount the motor, and align the whole assembly so the gate rolls true from day one.
Double Gate Installation
Double gates, whether they swing or slide, are common in Sun Valley where wide driveway openings need to close off a large frontage. Many older 1950s and 1970s homes here have double driveways that were widened over the years as the area industrialized. We install double swing gates with proper center stops and drop rods, and double slide gates that split to either side. The trick with doubles is getting both leaves to meet cleanly and lock securely without binding. That’s alignment work, and we do it every week.
Pedestrian Gate Installation
If your only entrance is a rolling chain-link gate, you do not want to walk through a 20 foot industrial slider every time you leave the house. That’s where a separate pedestrian gate makes sense. We install walk gates alongside driveway gates throughout Sun Valley, built to match the existing fence line and set with its own latch and lock. A pedestrian gate also keeps the main driveway gate from wearing out prematurely. Fewer cycles on the big gate means years more life from the operator.
Swing Gate Installation
Swing gates work where the driveway is flat enough and there’s room for the arc. Sun Valley has plenty of post-war single-family homes where a swing gate is the right call, but the soil here is old alluvial clay that expands and contracts with the seasons. A gate hung on a shallow footing will lean within the first year. We pour footings deep enough for the weight of the gate, with rebar tied to the existing driveway where practical, so the post stays where we put it.
Security Gate Installation
In Sun Valley, security is the primary driver of most gate work. This is a neighborhood with a lot of industrial traffic, and homeowners who live near auto dismantlers and scrap yards want a gate that actually keeps people out. We build Sun Valley Gate Access Control systems with heavy-gauge steel frames, anti-climb features, and integrated automation including keypads, intercoms, and loop detectors. When we install a security gate for a Sun Valley business, we often pair it with a Viking or BFT operator, tuned for high-cycle use.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sun Valley
We are trained and equipped on nine gate-automation brands, and in Sun Valley we lean most heavily on Viking, BFT, and FAAC for the industrial work. These are the operators that hold up to 200 cycles a day on a salvage yard entrance. We stock Gate Parts & Welding - Sun Valley supplies locally so a failed limit switch or a worn gear doesn’t mean a week of downtime. If you have a LiftMaster on a residential driveway gate or a Viking on a 40 foot slider, we service it. One visit, correct fix, done.
Common Gate Installation Problems We See in Sun Valley Homes
- Undersized post footings on older residential gates. Many 1950s to 1970s homes in Sun Valley had a small 4 foot pedestrian gate originally. When a new double swing gate gets hung on that same cracked footing, the hinge post starts shifting within months. We cut out and re-pour footings before we hang a new gate.
- Warped V-groove tracks on industrial sliders. Triple-digit heat expands steel, and a 500 pound sliding gate on a warped track binds and chatters. We true the track, reset the rollers, and realign the operator so the gate rides smoothly again.
- Swing gates that drag on uphill driveways. Some Sun Valley lots slope toward Glenoaks Boulevard, and a swing gate specified without accounting for the rise will drag on the concrete at the high end of its arc. We adjust the hinge placement and gate weight to clear the grade.
- Forklift crossings without safety photocells. On industrial lots where forklifts and trucks cross the gate path, UL 325 requires safety photocells to prevent entrapment. Older installations sometimes skip this. We install and align photocells and loop detectors as part of any industrial gate job, whether we’re replacing a gate or just retrofitting the operator.
Last summer we rebuilt a sagging 30 foot dual-leaf slide gate at a salvage yard off Glenoaks Boulevard. The hinge post had pulled out of its footing after years of forklift traffic. Our crew cut and re-poured the post footing, trued the warped V-groove track, and retrofitted the existing Viking operator with a new loop detector and safety photocells so the gate could cycle 200 times a day without binding. We kept the yard’s truck entrance open with a temporary swing gate the whole time. That’s the kind of install that tests whether a gate company actually knows what they’re doing in Sun Valley.
Pricing for Gate Installation in Sun Valley, CA
A typical single-leaf sliding gate with automation in Sun Valley runs $3,200 to $6,800 installed. A double swing driveway gate on a residential lot runs $2,800 to $5,500. Industrial dual-leaf sliders run $6,000 to $9,500 depending on gate length, steel gauge, and operator type. Pedestrian gates run $900 to $2,400. These are real numbers for this market, not national averages.
| Gate Type | Typical Installed Price in Sun Valley |
|---|---|
| Pedestrian Gate | $900 - $2,400 |
| Single Swing Driveway Gate | $2,800 - $4,800 |
| Double Swing Driveway Gate | $3,500 - $5,500 |
| Single Sliding Gate (Remote) | $3,200 - $6,800 |
| Industrial Dual-Leaf Sliding Gate | $6,000 - $9,500 |
What moves the price is gate length, steel gauge, the operator brand, and how much footing work the soil requires. Sun Valley’s clay-heavy older lots sometimes need deeper concrete pours than a newer subdivision would. Every quote is written and agreed before we turn a single bolt. No surprises on the bill. Call (925) 693-7978 for a free estimate. Standing offer: 5% off for seniors and veterans, always.
We Also Serve Cities Near Sun Valley
Our crews work throughout the San Fernando Valley. Beyond Gate Installation in Sun Valley, we handle gate jobs in North Hollywood, Panorama City, Burbank, and Van Nuys. If you’re just over the line in any of those communities, the same team, the same written promise, and the same live-answer phone line apply.
Serving Sun Valley, CA - Our Local Coverage Area
We’re based in the Sun Valley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sun Valley
Rack and pinion holds up better on long, heavy gates that cycle constantly. A chain drive stretches over time, especially on a 30 or 40 foot slider in triple-digit heat, and a stretched chain slips on the sprocket. Rack and pinion has no stretch, runs quieter, and handles the weight distribution more evenly. For most industrial sliding gates in Sun Valley, we recommend rack and pinion for exactly that reason. Call (925) 693-7978 and we’ll walk you through what’s on your gate now and what it would take to convert it.
We dig to a minimum of 36 inches, and deeper where the soil is loose or heavily disturbed. Sun Valley’s old alluvial clay expands and contracts with moisture, so a shallow footing will heave and shift the gate out of alignment. We compact the base, set rebar, and tie into existing driveway concrete where we can. The footing gets poured in one continuous pour so there are no cold joints. For sliding gates, the track and base plate need to be level to within a fraction of an inch, and that starts with the footing. We quote the footing work as part of every installation estimate.
Yes, but only if the gate is specified correctly for the grade. A swing gate that arcs uphill has to clear the high side of the driveway without dragging. On a slope, that often means raising the hinge side, adjusting the gate’s rake, or switching to a sliding gate that travels parallel to the slope instead of against it. We’ll measure the grade during the free estimate and tell you which option makes sense. No charge for the honest answer. Call (925) 693-7978.
A sliding gate is almost always the right answer. A swing gate, whether single or double, needs the full arc of the gate to stay inside your property line, and on a shared driveway that’s rarely possible without blocking the neighbor’s access. A sliding gate travels along the fence line and uses a fraction of the space. We’ve installed sliding gates on shared driveways throughout Sun Valley, with the gate set back far enough to leave the easement clear. We’ll also make sure the gate’s operator and controls don’t interfere with your neighbor’s right of way.
You don’t need one, but you’ll want one. A rolling chain-link gate is designed for vehicles, and cycling it every time someone walks in or out adds wear to the operator. A separate pedestrian gate keeps foot traffic off the driveway gate and gives you a quicker, easier way in and out. We install walk gates that match the existing chain-link fence line throughout Sun Valley. It’s one more opening to lock, but it extends the life of the big gate. Call (925) 693-7978 and we’ll price both options.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Sun Valley and the San Fernando Valley.