Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Los Feliz
When a wrought iron gate on a Los Feliz hillside tears a hinge or drags across a sloped driveway, you need a crew that understands exactly what they’re looking at. We do. Ironworks Gate Co. has been welding, straightening, and re-hanging driveway gates in Los Feliz long enough to know that a flat-ground fix rarely works above Los Feliz Boulevard. From rusted post footings in the flats to cross-slope geometry up in Los Feliz Hills, we stock the parts and bring the welding rig. Call (925) 693-7978 and a live person answers, day or night.
Why Ironworks Gate Co. Is Los Feliz’s Preferred Gate Parts & Welding Company
Los Feliz homeowners don’t tend to gamble on contractors. Most have lived in the same 1920s Spanish Colonial Revival or Craftsman home for twenty, thirty years or more, and they remember the last guy who said he could fix the gate and didn’t. That’s why our Gate Parts & Welding crews get called back here, block after block, from Hillhurst Avenue up into the winding lanes above Los Feliz Boulevard. We’ve re-set posts on Glendower Avenue, re-welded scrollwork on Aberdeen, and replaced rollers on gates off Franklin. The common thread: every one of those homeowners got a written price before the first bolt turned, and every one of them got a 90-Day Done Right Promise in writing when we finished.
Victor Salinas leads our teams, and the standard he sets is the same one he’s held since the day he started: weld it like it’s going to be there in forty years. We show up in uniform, background-checked, and we don’t leave until the gate swings true and the operator stops fighting the hill.
Our Gate Parts & Welding Services in Los Feliz
Hinge Replacement
On a 1920s Los Feliz estate gate, the original hinges are often hand-forged and beautiful, but the pin has worn thin or the plate has pulled loose from the masonry pilaster. We replace the hinge with a heavier-rated unit that carries the gate’s full weight without sagging, and we’ll custom-weld a period-appropriate strap or barrel hinge when the architecture calls for it. A hinge replacement in Los Feliz typically runs $180-$420 depending on gate weight and whether we’re anchoring into masonry or steel.
Post Replacement
This is the job Los Feliz hillside-driveway owners need most. When saturated ground from winter deluges shifts a post, or when years of Santa Ana wind load have worked a steel post loose inside its concrete footing, the gate will never hang straight until the post is re-set. We pull the old post, excavate the footing, pour fresh concrete below the frost line, and set a thicker-wall post plumb and true. Most post replacements in Los Feliz run $650-$1,400, including footing re-set and gate re-hang.
Rail Repair
Wind is a fact of life at the base of the Santa Monica Mountains, and a solid infill gate acts like a sail. Rails that have bent, cracked, or separated from the pickets get cut out and replaced, then the whole panel gets re-squared. We match the original rail profile when we can, so the repair doesn’t jump out at you. Rail repairs in Los Feliz commonly run $250-$600 per rail, depending on the ornamental detail and whether the panel needs to come off site for the weld.
Custom Welding
For a Los Feliz home, the gate isn’t just hardware, it’s part of the front elevation. When an original 1920s scroll breaks, you can’t bolt on a piece from the big-box store. We fabricate replacement scrolls, finials, and hinge straps in our welding shop to match the original forging, then blend the finish so it looks like it’s been there since 1926. Custom welding work in Los Feliz starts around $180 for a small ornamental repair and runs up from there based on the amount of fabrication involved.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Feliz
We’re certified on nine gate-automation brands, and on the hills of Los Feliz we see a lot of Viking, Ghost Controls, and DoorKing operators doing hard work on exposed driveways. When a Los Feliz customer calls about an operator that’s burning out, we don’t guess, we diagnose. And because our Los Angeles office keeps parts on the shelf for all nine brands, we usually complete the repair in the same visit. Dispatch and scheduling are coordinated from our Los Angeles office; the crews who arrive at your gate serve Los Feliz locally, and they know the grades on these streets.
Common Gate Parts & Welding Problems We See in Los Feliz Homes
- Santa Ana wind load on solid infill gates. Gusts that funnel out of Griffith Park’s canyons hit a solid wrought iron or wood-infill gate like a truck. We routinely see top hinges torn out of masonry pilasters and light ornamental panels bent past repair after a wind event. The fix is a heavier hinge strap, a thicker post, and sometimes a wind-relief cut in the panel.
- Saturated hillside soil shifting post footings. Los Feliz winters bring short, intense deluges, and hillside driveways with poor drainage saturate fast. When the ground lets go, the post leans, and the gate drags or won’t latch. We excavate, improve the drainage, and re-set the footing properly.
- Cross-slope driveway geometry that standard gates can’t clear. On a steep cross-slope, a flat-ground swing gate physically cannot clear the grade. It binds on the uphill side, scrapes on the downhill side, and puts constant stress on the operator. We spec raked parallelogram gates or sloped-track slide gates, and that one assessment step saves thousands in repeated repairs.
- Original 1920s ironwork that’s finally given out. Gates that have hung for nearly a century let go in predictable ways: the bottom rail rusts through where water pools, and hinge pins wear into a slot. We restore and re-weld the original iron rather than replacing it with an off-the-shelf aluminum panel that would never match a Spanish Colonial Revival pilaster.
Pricing for Gate Parts & Welding in Los Feliz, CA
Our Los Feliz pricing reflects the work these hillside properties actually require. A hinge replacement runs $180-$420. Rail repair runs $250-$600 per rail. Post replacement with footing re-set runs $650-$1,400. Custom ornamental welding starts around $180 and climbs based on fabrication time. Raked-gate and sloped-track slide gate work is quoted after a site assessment, which is free. Every quote is written and agreed before work starts, and every job carries our 90-Day Done Right Promise in writing. Ask about our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, the $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Los Feliz
Our crews work all over the east side of the hill. In addition to Gate Parts & Welding in Los Feliz, we regularly serve North Hollywood, Burbank, Glendale, and Studio City. If you’re on the edge of the neighborhood, in Los Feliz or just over the line, call and we’ll get you scheduled.
Serving Los Feliz, CA - Our Local Coverage Area
We’re based in the Los Feliz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Los Feliz
That dragging is a geometry problem, not a hinge problem. On a steep cross-slope driveway, a standard flat-ground swing gate cannot physically clear the grade as it arcs, so the downhill leaf scrapes while the uphill leaf binds. The permanent fix is a raked parallelogram gate or a sloped-track slide gate. We’ll assess your driveway slope, show you exactly why the current gate can’t work, and quote the right solution. Call (925) 693-7978 for a free site assessment.
As with most modern operators, there’s a manual release mechanism, typically a keyed or pull release on the operator arm, that disconnects the gate from the drive so you can push it open by hand. If you’re standing in a windstorm in the dark in Los Feliz, the last thing you want is to be reading a manual. Know where your release is before the storm, and if the gate is actively being wind-loaded, don’t try to force it, wait for a lull. Then call us and we’ll get the operator re-engaging properly. If you’re near Griffith Park, the wind exposure is worse than most of the city.
If the hinge itself failed but the post is still plumb and the masonry or steel isn’t cracked, a hinge replacement is enough. But if the post leans, the footing has shifted, or the hinged side of the post flexes when you push the gate, the post needs replacement. On Los Feliz hillsides, this is common after deluges. We’ll tell you plainly which one you’re dealing with.
Yes. We cut, forge, and weld replacement scrolls, finials, and hinge straps to match the original profile and hand-finish them so the repair blends in. This is the kind of work we do regularly for homes in Los Feliz Hills and Los Feliz Estates. Call (925) 693-7978 and we’ll come take a look at what needs matching.
Your Los Feliz street sits at the base of Griffith Park, and the Santa Ana winds that funnel through those canyons hit your gate with far more force than the flats of Silver Lake ever saw. A solid infill gate under constant wind load makes the operator work harder every cycle, and that shortens its life measurably. The answer is often a wind-relief cut in the panel, a heavier-duty operator, or a gate that’s been properly raked for the slope, not just a new motor.
One More Thing About Los Feliz Gates
On Glendower Avenue, our crew pulled a 1920s Spanish Colonial Revival driveway gate whose top hinge had torn clean out of the masonry pilaster after back-to-back Santa Ana gusts funneling out of Griffith Park. We replaced the hinge post with a thicker-wall steel post, re-set the footing with extra concrete below the frost line, and custom-welded the original scrollwork back onto the new post, then re-tensioned the rack and pinion on the LiftMaster operator so the gate stopped binding on the cross-slope. That job sums up what gate work in Los Feliz actually is: wind, slope, old iron, and the patience to get all three working together.
Get Your Los Feliz Gate Fixed Right
If your gate is dragging, sagging, or just plain stuck on a hillside driveway, call (925) 693-7978 now. A live person answers, 24/7. We’ll schedule a free estimate, quote you a written price before any work starts, and stand behind the job for 90 days in writing. That’s the deal, whether you’re on a bungalow court flat off Hillhurst or an estate above Los Feliz Boulevard.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Feliz with gate parts, welding, and automation repair.