Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Glendale
Gate repair in Glendale usually costs between $180 and $650 depending on whether the problem is a hinge, a motor, a weld, or a post that has shifted. Most Glendale gate problems are the result of two things we see every week: Santa Ana wind gusts off the Verdugo Mountains, and original 1920s-to-1950s concrete gate posts that have settled unevenly over decades. We work on Glendale gates every single day, from the flat grid south of Glenoaks Boulevard up into the canyons, and we know how the local climate and housing stock affect the metal. If your gate is dragging, jamming, or stuck open, call (925) 693-7978 and a live person will answer, 24 hours a day.
Why Ironworks Gate Co. Is Glendale’s Preferred Gate Repair Company
Ironworks Gate Co. has specialized in driveway and estate gates for over 42 years. Nothing else. That focus is exactly why Glendale homeowners call us when a gate fails: this work is a craft, not a side job. Our Gate Repair team is trained on nine automation brands and backgrounds in both welding and electronics, so the same technician who re-hangs a sagging wrought iron panel can also diagnose a motor fault in a LiftMaster or FAAC opener. Glendale customers tell us the thing they value most is that a live person answers the phone at any hour, and the price is agreed before a single bolt is turned. No answering service. No callback queue. No surprises on the bill.
Victor Salinas leads our crews, and the “K.E.Y.S.” values he built the company on are simple: Krafted right. Every time. Your home first. Standing behind it. Every one of our Glendale jobs, from a hinge replacement on a 1940s swing gate to a full automation rebuild on a hillside slide gate, is protected by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing.
Our Gate Repair Services in Glendale
Electric Gate Repair
Electric gate repair in Glendale typically runs $220 to $500 for control board, capacitor, or limit switch work, and we stock parts for major brands locally so most electric faults are resolved in one visit. Hillside properties above Glenoaks Canyon put extra load on opener motors, and we routinely replace worn armatures and burnt drive belts on gates that have been fighting a steep grade for twenty years. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Automatic Gate Repair
Automatic gate repair in Glendale runs $250 to $650 for a system that has stopped responding, started reversing mid-cycle, or begun moving at half speed. The most common causes we find locally are photo-eye failures from dust and spider webs, bad loop detectors, and binding from shifted posts. We test the full system, not just the obvious part, because an automatic gate that works for two weeks and fails again is not fixed.
Hinge & Post Repair
Hinge and post repair in Glendale is the bread and butter of what we do, because so many of the city’s original concrete gate posts are older than most of the houses that surround them. A typical hinge replacement on a decorative wrought iron gate runs $140 to $320, while re-setting a settled post with a new footing runs $400 to $800 depending on access and whether the existing concrete must be cut out. In Chevy Chase Canyon and Glenoaks Canyon, most posts built before 1960 have moved at least half an inch due to decades of uneven settling.
Gate Realignment
Gate realignment in Glendale runs $160 to $350 for swing gates that drag, latch improperly, or sag so badly the automatic opener strains. We correct hinge points, add sag-correction kits where needed, and adjust the post hardware so the gate clears the driveway without binding. On hillside homes where the driveway itself has settled, realignment is often the difference between a gate that works silently and one that strips its own motor mount every few months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glendale
We service nine automation brands including FAAC, BFT, and Linear, and we keep common control boards, remotes, photo-eyes, and capacitors on our trucks for Glendale jobs. That matters because a homeowner on a Verdugo hillside should not wait three days for a part to ship while their gate is stuck open. Whatever opener is on your driveway, we have likely serviced a dozen of the same model this month alone.
Common Gate Repair Problems We See in Glendale Homes
- Santa Ana wind damage: Wind gusts funneled along the Verdugo Mountains routinely knock large swing gates off their hinges or bend cantilever slide-gate frames, especially in exposed hillside neighborhoods. We see a spike every October through January.
- Settled concrete posts: Original 1920s-to-1950s concrete posts in Chevy Chase Canyon and Glenoaks Canyon have shifted over decades, pulling gate panels into the driveway. The fix is a new footing and a proper re-hang, not another shim.
- Summer heat expansion: Valley-floor heat above 100°F expands steel hardware, loosening hinge bolts and warping custom frames faster than in coastal neighborhoods like Burbank. Seasonal tune-ups catch this before the gate starts to sag.
- Operator strain from steep grades: Northern hillside driveways in Glendale sit on steeper grades than the flat grid, which means slide-gate motors work harder, bottom tracks warp sooner, and belts wear through faster than the same system on a flat lot.
Pricing for Gate Repair in Glendale, CA
Here are our honest Glendale market ranges: hinge and latch repair, $140 to $320. Gate realignment, $160 to $350. Electric gate repair, $220 to $500. Post reset with new footing, $400 to $800. Weld and rust repair on decorative iron, $180 to $450 per section. These are not quotes - your exact price depends on your gate’s size, weight, and what has failed - but they are real numbers from real Glendale jobs. Every job is quoted and agreed before any work starts, and the price on that written quote is the price on the bill. Call (925) 693-7978 for a free estimate. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Senior and veteran customers always get 5% off.
We Also Serve Cities Near Glendale
Our crews cover Glendale every day, and we also serve nearby communities including Burbank, North Hollywood, Sun Valley, and Tujunga. If you are in one of those areas and your gate has failed, the same Glendale-based team can reach you fast. Call (925) 693-7978 and a live person will answer at any hour.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Glendale
Your gate keeps binding every fall because Santa Ana wind events off the Verdugo Mountains are knocking the gate panel slightly out of alignment, adding to the natural sag of decades-old posts. The fix is usually a realignment with a sag-correction kit on the hinge side, not repeated shimming. Call (925) 693-7978 for a realignment quote. And note that Glendale’s designated Very High Fire Hazard Severity Zones along the Verdugo Hills interface mean automated gates must have functioning manual-release overrides, so we check that on every hillside call.
In Glendale’s Very High Fire Hazard Severity Zones along the Verdugo Hills, automated driveway gates are expected to have working manual-release overrides so they never block an evacuation route during a fire. Fire inspectors and insurance adjusters will ask about it, and we check it on every hillside repair call, even when the original complaint is something else entirely. If your release is seized or missing, we repair or install one as part of the same visit.
Yes. We regularly reset original concrete gate posts in Glendale without replacing the gate itself. We dig a new footing, pour it properly, re-hang the existing gate panel, and correct the sag with hinge-point adjustments. Total cost for that work typically runs $400 to $800 depending on access and whether the old concrete must be cut out. Call (925) 693-7978 for a free assessment of your post.
Glendale sits against the Verdugo Mountains and its valley floor regularly exceeds 100°F, while Burbank, just a few miles west, gets more coastal airflow moderation. That sustained heat expansion cycles the steel in your slide gate, loosening bolts and warping the frame faster than on comparable flat-lot installations in Burbank. We correct this with seasonal hardware tightening, frame reinforcement, and bottom-track realignment. An $89 seasonal tune-up catches the problem before the operator fails.
Yes. The same technician who repairs the custom wrought iron can also service your intercom, keypad, and camera entry system. We regularly pair new automation with existing entry systems, or replace outdated intercoms and cameras when the gate is already apart. Victor Salinas and our crews handle the full scope: hinges, welds, motors, access control, and the wiring between them. Call (925) 693-7978 and a live person will set up a free on-site estimate.
Call Ironworks Gate Co. for Gate Repair in Glendale, CA
If your gate is dragging, jammed, stuck open, or making a sound it never made before, call (925) 693-7978 today. A live person answers 24 hours a day, 7 days a week. We serve every Glendale neighborhood, from Adams Hill and Montrose up through Chevy Chase Canyon and Glenoaks Canyon, and we know what these hills do to a gate. Your price is agreed before the work starts. Your job is covered by our written 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Glendale and the surrounding communities with dedicated gate repair craftsmanship.