Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Repair Across North Hollywood
When a gate stops opening in North Hollywood, it rarely happens at a convenient moment. A slide gate jammed halfway across a driveway on Lankershim means you’re not getting the car out. A swing gate that won’t close leaves the whole property open to Tujunga traffic. We answer the phone live at (925) 693-7978, 24 hours a day, and we dispatch to North Hollywood from our Los Angeles office with crews who know this neighborhood’s gates from thirty years of working on them.

Most North Hollywood gate repairs are completed in a single visit. We carry the parts that matter here: heavy-duty racks, hinge post bearings, photo-eye sets, and opener control boards for the brands this neighborhood actually runs. You get an upfront price before any work starts, and every job is backed in writing by our 90-Day Done Right Promise.
Why North Hollywood Gates Fail the Way They Do
North Hollywood’s gate stock is old, and it’s old in a particular way. Through the 1980s and 1990s, this neighborhood’s historically elevated crime rates relative to Burbank and Studio City drove a wave of slide and swing gate installations across single-family driveways and apartment complexes. That means a large cohort of gates along streets like Vineland, Tujunga, and Lankershim are now 30 to 40 years old and reaching the end of their service life at the same time. We don’t see many simple fixes in North Hollywood. We see full hardware overhauls: worn-out rack and pinion sets, hinge posts that have pulled loose after decades, and opener motors that have been replaced two or three times without ever addressing the real problem underneath.
Because North Hollywood falls within the City of Los Angeles, not an independent municipality like Burbank, every automatic gate repair here is subject to LA City permit rules and UL 325 entrapment-protection compliance. That regulatory layer changes how a repair has to be done. A contractor working a mile across the city line doesn’t answer to it. We do.
Victor Salinas has built Ironworks Gate Co. around a simple standard: what gets fixed gets fixed so it stays fixed. His crews know what a North Hollywood gate looks like when the valley heat and the settling concrete have had forty years to work on it. That’s the job we’re called to do here, and it’s the job we prepare for every time we roll into the neighborhood.
Why Ironworks Gate Co. Is North Hollywood’s Preferred Gate Repair Company
We’ve worked on gates up and down Lankershim, through the residential streets west of Vineland, and across the apartment corridors near Tujunga. Homeowners in North Hollywood call us for the same reasons: we give a square deal, we show up when we say we will, and we don’t leave until the gate operates the way it should. Our Gate Repair team is trained on nine major opener brands, so when we arrive at a North Hollywood driveway, the correct fix usually happens on that first visit.
Every technician who arrives at your door is background-checked and uniformed. Every price is quoted and agreed before a single bolt is turned. And every job carries the 90-Day Done Right Promise in writing: if it isn’t right, we come back and make it right, no paperwork, no arguing. North Hollywood homeowners who have been burned by contractors before tend to notice that difference.
We’re a phone call away at (925) 693-7978. A live person answers, 24/7, not a voicemail tree.
Our Gate Repair Services in North Hollywood
Electric Gate Repair
Electric gates in North Hollywood fail in patterns. The San Fernando Valley regularly hits 105°F to 110°F in summer, ten to fifteen degrees hotter than the coast, and that sustained heat cooks control boards, degrades wiring insulation, and burns out capacitors well before manufacturer duty-cycle ratings. We diagnose the electrical fault correctly the first time, because we’ve seen the same failures on the same neighborhoods hundreds of times. No guessing, no swapping parts until something works.

Automatic Gate Repair
Automatic gate repair in North Hollywood often means repairing the operator’s relationship with the gate, not just the operator itself. A 35-year-old slide gate that’s binding on a heaved concrete pad will pull excessive amperage and destroy a new motor within a season or two. When we replace an opener, we check what the opener is being asked to move. If the track, rollers, rack, or post footings are fighting the motor, we fix that first. That’s the difference between a repair and a repeat repair.

Hinge & Post Repair
Swing gates all over North Hollywood are sagging on 30- and 40-year-old hinge posts. The postwar bungalows off Tujunga and Vineland were built in the 1940s and 1950s, and their driveways have shifted with decades of root pressure and valley heat. A hinge post that’s pulled loose from its footing will cause a gate to drag and bind no matter how many times you adjust the hinges. We cut out the old footing, pour a new one, re-set the post, and hang the gate so it swings true.

Gate Realignment
For slide gates across North Hollywood, realignment is usually about the concrete, not the gate. Many properties here had slide gates retrofitted onto existing driveways during the late 1980s and 1990s without reinforcing the underlying slab. The pad heaves and cracks, the track pitches, and the gate starts to bind and strain the motor. We re-level the track, replace worn rollers, and re-set the gate so the operator isn’t fighting the driveway anymore. If the pad itself is the problem, we’ll tell you plainly and price the concrete work honestly.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Hollywood
North Hollywood driveways run a mix of opener brands, and we’re certified to work on all the ones that actually show up here. We service FAAC, BFT, Linear, Viking, DoorKing, LiftMaster, Ghost Controls, Elite, and Mighty Mule. We stock common control boards, photo-eye sets, and gear kits for North Hollywood’s most common brands, which keeps most repairs to a single visit. If your opener is a 30-year-old DoorKing pulling eight amps on start-up, we know exactly what that sounds like before we even open the cover.
Common Gate Repair Problems We See in North Hollywood Homes
- Slide-gate tracks knocked out of alignment by settled concrete and tree roots. Postwar driveways along streets like Tujunga and Vineland have had 60-plus years to shift, and the roots of mature ficus and magnolia trees are relentless. The track pitches, the rack binds, and the motor strains until the gear fails.
- Gate operators burned out early by valley heat. North Hollywood’s 110°F summer days push operators beyond their design limits. Wiring insulation cracks, loop-detector leads degrade, and motors overheat. An operator that should last ten years can fail in three if it’s undersized for the gate or the gate is binding.
- Hinge posts pulling loose on 30-40-year-old swing gates. The post footings were poured when the house was young, and the earth has moved since. Gate sag that comes back after every adjustment is almost always a post footing that’s given way.
- Photocell and safety-edge faults that put the gate in permanent reverse. UL 325 requires entrapment protection, and when photo-beams misalign or safety edges degrade in the heat, the gate won’t close. We re-align or replace the safety devices and re-test the whole system to code.
We rebuilt a sagging slide gate on a ranch-style driveway off Lankershim where the hinge post footing had cracked from decades of Valley heat and root pressure. The gate operator, a 30-year-old DoorKing, was pulling 8 amps on start-up because the rack and pinion was binding on a heaved concrete pad. Our crew poured a new post footing, re-welded the rack, and re-set the safety photocells. The owner hasn’t had a motor fault since.
Pricing for Gate Repair in North Hollywood, CA
Gate repair in North Hollywood runs on real numbers. A simple photo-eye realignment or limit-switch adjustment typically runs $125 to $225. Replacing a swing-gate hinge set with new bearings runs $250 to $450. A hinge post footing replacement, including concrete and re-setting the post, runs $500 to $900 depending on post size and access. Gate realignment on a settled slide track runs $275 to $550. A full rack and pinion replacement on a heavy slide gate runs $600 to $1,100. Automatic opener replacement with a new motor and control board runs $850 to $1,800 depending on the brand and gate size. You’ll get a written quote before any work starts, and that price doesn’t change unless we find something we didn’t agree on first.
Ironworks Gate Co. also honors standing offers on North Hollywood jobs: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (925) 693-7978 for a free estimate.
We Also Serve Cities Near North Hollywood
Our crews cover the broader San Fernando Valley and the eastern edge of the Hills. If you’re in North Hollywood proper or nearby in Studio City, Sun Valley, Van Nuys, or Burbank, we’ll come to you. Different city, different code office sometimes, but the same standard of work.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Hollywood
Most automatic gate repairs in North Hollywood do not require a permit if the work is maintenance or like-for-like replacement, but major structural changes like replacing post footings or extending a driveway track can trigger LA City permit requirements. Our team knows which repairs cross that line and will tell you before work begins. Call (925) 693-7978 and we’ll talk through your specific situation.
Because North Hollywood’s summer heat runs 10 to 15 degrees hotter than coastal Los Angeles, and if the gate is binding even slightly, the motor pulls excess amperage every single cycle. The heat degrades the wiring insulation and the motor windings, and the constant overcurrent finishes the job. We size the replacement for the gate as it actually operates here, not the coastal duty-cycle rating.
Your hinge post footing has almost certainly failed. On 30- to 40-year-old North Hollywood gates, the original concrete around the post has cracked or crumbled, so the post flexes under the gate’s weight and the hinges settle out of alignment within weeks. Adjusting the hinges without re-pouring the footing is a temporary patch. We replace the footing and re-hang the gate so it stays put.
Yes. Because North Hollywood is within the City of Los Angeles, automatic gates must meet UL 325 entrapment-protection standards, including properly functioning photo-eyes, safety edges, and force settings. Contractors working in Burbank answer to a different jurisdiction. We test your entire entrapment-protection system as part of every automatic gate repair and leave you a gate that meets current code.
Yes. We regularly service solar-powered gate operators on North Hollywood properties where running mains power to the driveway is impractical. The valley sun is more than adequate for a properly sized panel and battery bank, and we troubleshoot the whole solar system, panel, charge controller, battery, and operator. Call (925) 693-7978 for an exact quote, estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Hollywood and the San Fernando Valley.
Before
After
Before
After
Before
After