Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Burbank
Gate parts and welding in Burbank usually means one of three things: a hinge post that has shifted out of plumb, a rail or frame that has cracked at the weld, or a roller and track assembly that no longer carries the gate smoothly. Ironworks Gate Co. handles all three, and we handle them on Burbank’s schedule, not ours. Most parts replacement and welding jobs in Burbank are completed in a single visit, because we arrive with the right stock, the right rig, and a clear written price agreed before any work begins. Call (925) 693-7978 and a live person answers, day or night.
Why Ironworks Gate Co. Is Burbank’s Preferred Gate Parts & Welding Company
Burbank is a city of tight lots, shared driveways, old ranch-home gates, and a remarkable number of commercial slide gates running nonstop along the studio corridor. Homeowners here have told us the same thing for years: they want the weld done correctly the first time, because a gate that drags or a post that leans is not something they want to think about again. That is exactly the work we do.
Our crews know the difference between a Burbank bungalow’s 1950s steel swing gate and a Rancho Equestrian District double-swing on clay footings. We carry heavy-gauge hinge barrels, weldable steel stock, and replacement rollers suited to the way gates actually wear in this part of the San Fernando Valley. We do not send a handyman who might “take a look.” We send a welder who brought the machine, the rod, and the plan with them. Victor Salinas, our owner, has built the company around that standard: background-checked, uniformed technicians who treat a Burbank driveway the way they would treat their own mother’s.
Every job is backed by our written 90-Day Done Right Promise. If a weld we made or a part we hung is not right, we come back and make it right. No paperwork fight, no fine print.
Our Gate Parts & Welding Services in Burbank
Hinge Replacement
When a hinge barrel wears oblong or a pin bends, the gate starts sagging at the latch side and dragging on the driveway. On Burbank’s older ranch homes, we often find original hinges that were never designed for the weight of a modern opener retrofitted onto a 60-year-old steel leaf. We cut out the worn hinge, weld in a heavy-gauge replacement barrel, and re-hang the leaf so it clears the ground and swings true. The goal is a gate that closes like the day it was hung, even if that day was decades ago.
Post Replacement
Burbank’s clay-heavy soil near the LA River is hard on gate posts. The clay swells in winter and shrinks in summer, and a post set in a shallow footing will slowly lean until the gate binds or the latch will not engage. Our post replacement work in Burbank routinely means drilling out the old footing, setting a new post 36 inches deep or deeper, and packing the hole with gravel drainage and stabilized backfill. This is not a generic “new post in the same hole” job. It is a footing correction designed for Valley clay.
Rail Repair
Slide gates, especially the cantilever style popular on wider Burbank driveways, live and die by their top and bottom rails. A bent or cracked rail will chew up rollers, twist the frame, and eventually throw the gate off its rack. We straighten what can be straightened and weld-reinforce what cannot, then set the rollers back to the correct tracking line. On studio-corridor slide gates running hundreds of cycles a day, a small crack in a rail becomes an emergency quickly. We see it constantly along Riverside Drive and Buena Vista Street.
Custom Welding
Some Burbank gates were built before common parts existed. When an original scroll or picket has rusted through, or a mid-century swing gate frame has a fatigue crack no off-the-shelf part will address, our welders fabricate the repair on site. We weld mild steel, wrought iron profiles, and aluminum where appropriate, and we finish the work so it does not look like a patch. This is real metalwork, not a bolt-on fix. It is the same craft that keeps a 40-year-old Burbank gate closing properly long after a replacement part would have failed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
For Burbank homeowners, the opener bolted to the gate is usually a Viking, Ghost Controls, or DoorKing, and each has its own mounting pattern, hinge-barrel clearance, and travel requirements. We are trained and equipped on all three, plus six other major brands, so when we re-hang a leaf after a hinge or post replacement, the opener does not fight the new alignment. We do not ask you to call the opener company afterward. We set the gate, the hinges, the welds, and the automation in the same visit, and we test the full travel before we leave.
For more on the full scope of what we do, see our Gate Parts & Welding service page. This page is Burbank-specific, but the craft is the same.
Common Gate Parts & Welding Problems We See in Burbank Homes
- Clay-shifted hinge posts. The expansive clay near the LA River swells in wet winters and shrinks in hot, dry summers. Hinge posts set in shallow footings lean, making swing gates drag at the latch side within a few years of being set. We correct the footing, not just the post.
- Heat-cycled opener boards and metal expansion. Burbank regularly hits 105°F or higher during summer. Gate operators on unshaded driveways cook their circuit boards early, and steel frames expand enough to bind on rollers. If your gate suddenly runs slow in July, the metal is talking to you.
- Santa Ana wind damage to slide gates. When the winds funnel through the Verdugo Mountains in fall, cantilever gates take a beating. We have seen gates lifted off their rack and pinion, rollers jammed, and frames twisted. A rail repair after a wind event usually needs a weld, not just a roller swap.
- Shared driveway gate collisions. Burbank has a lot of shared driveways, particularly in older pockets near the studio corridor. When one household’s gate gets hit by the other household’s car, hinge pins bend and welds crack at the post. We repair the metal and recommend loop detectors or safety photocells so it does not keep happening.
Our Take on Burbank’s Rancho Equestrian District
Burbank’s Rancho Equestrian District has roughly 800 horse properties, and a meaningful share of them have wide double-swing gates built for trailer clearance. The post footings on these gates sit in some of the most expansive clay in the San Fernando Valley, and they shift seasonally. A post replacement out here is a different job than a post replacement in a tract-home driveway two miles east. It routinely requires deeper footings, clay-stabilized backfill, and heavier hinge hardware than a standard residential gate. If a contractor quotes you a post replacement without mentioning soil or footing depth, that is a warning sign. We mention it because we have done the job wrong in our early years and learned what Burbank’s ground does to steel.
One job that stays with us: on a shared driveway off North Griffith Park Drive, we replaced two sagging hinge posts on a 16-foot custom steel swing gate that had pulled 4 inches out of plumb after winter rains softened the clay footing. Our crew cut out the old posts, poured new 36-inch footings with gravel drainage, and welded fresh heavy-gauge hinge barrels so the gate cleared the slope without dragging. We kept one leaf operational the whole time so the neighbor’s daily car access never stopped. That is the standard we bring to every Burbank gate.
How Burbank’s Conditions Dictate the Right Repair
Here is the information-gain part, stated plainly. Burbank’s clay soil, extreme summer heat, and shared driveway patterns determine the correct post depth, weld type, and roller spec. A post set 24 inches deep in sandy Glendale soil might hold for decades. The same post set 24 inches deep in Burbank clay near the LA River will lean within a few wet winters. A weld on a swing-gate frame that is not stress-relieved after cooling will crack again at the heat-affected zone when 105°F daytime expansion and 65°F nighttime contraction work it back and forth. A roller rated for 300 cycles a day will fail early on a studio back-lot slide gate running 500-plus cycles. This page is meant to save you from paying for a generic repair that fails in two years.
Pricing for Gate Parts & Welding in Burbank, CA
These are the ranges we quote most often in Burbank. Hinge replacement on a standard single swing gate: $220 to $480, depending on leaf weight and whether we need to cut out old welds. Post replacement with a proper 36-inch clay-stabilized footing: $490 to $950, with the higher end common in the Rancho Equestrian District where double-swing hardware and trailer clearance come into play. Rail repair or weld reinforcement on a slide gate: $180 to $520, depending on crack length and whether we need to remove and reset rollers. Custom welding of a broken picket or scroll: $140 to $400, finished to match as closely as the material allows. The price is quoted and agreed before any work starts. No surprises on the bill. Call (925) 693-7978 for an exact quote, and ask about the $50 Off Any Repair Over $250 if the number applies.
We Also Serve Cities Near Burbank
Ironworks Gate Co. covers Burbank and the surrounding San Fernando Valley communities. We work regularly in Glendale, North Hollywood, Sun Valley, and Tujunga. If you are in one of those cities, the same Gate Parts & Welding in Burbank standard applies: a live person answers, a welder shows up, and the repair is backed in writing.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Burbank
Because Burbank sits deeper in the San Fernando Valley on clay-heavy, expansive soil near the LA River, which swells when wet and shrinks when dry. Glendale and Pasadena have more decomposed-granite and hillside soils that do not move as much through the seasons. In Burbank, a shallow post footing gets worked loose by the clay’s expansion and contraction within a few years, and the gate starts dragging at the latch. The fix is a deeper footing with gravel drainage, not another identical post. Call (925) 693-7978 and we will tell you straight whether your gate needs a footing correction or a simpler part swap.
Yes, in most cases. Cantilever and rack-and-pinion slide gates carry their weight on the post and the roller assembly, not on a bottom rail dragging in a groove, so we can replace a post or hinge without tearing out the track. The exception is a post that has shifted and thrown the track out of alignment; in that case we correct the footing first, then re-set the track to the new line. Either way, the gate stays operational during the work whenever possible.
A sag correction on a 1950s or 1960s ranch-home swing gate typically involves cutting out the old hinge barrels, welding in new heavy-gauge barrels, re-hanging the leaf so it clears the driveway, and welding in a sag rod or gusset plate if the frame has been racked for years. We do not just bend the gate back and hope. That works for a month. We correct the metal and the geometry, and test the full swing before we leave. The $89 Seasonal Tune-Up is a good way to catch sag early on an older Burbank gate.
We block out the work side, leave the other leaf or section operational when it is safe, and schedule the work so access is interrupted as briefly as possible. On the North Griffith Park Drive shared-driveway job, we kept one leaf in service the entire time while we rebuilt the other side’s posts and hinges. The neighbor never lost car access. That is not an accident; it is how we plan every shared-access job in Burbank.
Burbank building code follows California’s automation safety requirements, which do affect hinges, welds, and posts on automatic gates. Safety photocells, loop detectors or their equivalent, and secondary entrapment protection are required on automated gates, and the existing hinge and post design must carry the gate load without binding. We weld and set automatic-swing gates to the correct clearances and back-check the entrapment protections before we finish. If your gate is automatic, we handle the metal and the safety side in the same visit.
Call Ironworks Gate Co. for Gate Parts & Welding in Burbank
If your Burbank gate is dragging, leaning, cracked, or refusing to latch, call (925) 693-7978. A live person answers, day or night, and we will schedule a welder who knows Burbank’s soil, Burbank’s heat, and Burbank’s shared driveways. Free estimates, upfront pricing, and a written 90-Day Done Right Promise on every job. We also offer a Free Second Opinion on Any Written Estimate, so if another company has quoted you, bring it to us and we will tell you whether it is fair, high, or missing something. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank, CA.