Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burbank
Gate installation in Burbank runs $2,800 to $11,500 for most residential jobs, with a site visit, written quote, and full installation usually completed within seven to ten business days. We’re Ironworks Gate Co., and we’ve handled just about every gate situation Burbank throws at a tradesman: tight shared driveways off North Parish Place, wide equestrian entrances in the Rancho District, and slide gates along studio-corridor streets where a swing gate simply won’t fit. Call (925) 693-7978 for a free measure and a price you can hold us to, in writing, before any work begins.
Why Ironworks Gate Co. Is Burbank’s Preferred Gate Installation Company
Our crews know Burbank block by block. We know that a driveway on Chandler Boulevard has different setbacks than one on a hillside street off Harvard Road, and we plan footings, track runs, and operator mounts accordingly. The Gate Installation work we do here is not templated; it is measured against the actual site, the actual soil, and the actual way the homeowner uses the gate every day.
Victor Salinas, who runs our field operations, has walked more Burbank driveways than he can count. He trains every technician to check for the two things that fail most in this city: hinge posts seated in expansive clay, and operators that get cooked by summer heat radiating off asphalt. We’re not the lowest bid in Burbank, and we don’t try to be. We’re the company that writes a 90-Day Done Right Promise on every job, signs it, and comes back if anything is off. No paperwork arguments, no chasing a dispatcher.
One more thing we hear from Burbank homeowners, especially the ones who’ve been in their houses since the 1970s: they’ve been burned by contractors who show up late or not at all. We will be there when we say. A live person answers our phone 24 hours a day, every day, and the technician who arrives is background-checked and uniformed.
Our Gate Installation Services in Burbank
Driveway Gate Installation
A driveway gate in Burbank usually means a steel frame with either a slide or swing configuration, sized to the driveway width and the vehicle that needs to clear it. On post-WWII ranch homes in the Magnolia Park area, we often install a single swing gate with an operator tucked behind a pillar; on wider lots near the Rancho, it’s a double swing or a slide. Every driveway gate we install is quoted with post depth, hinge type, and operator model named on the written estimate.
Pedestrian Gate Installation
We install a lot of pedestrian gates along Burbank’s older bungalow lines, where a walk gate sits beside a driveway or opens onto a side yard. These gates look simple, but a sagging post or a latch that won’t catch in a Santa Ana wind is a call we get every fall. We set pedestrian gate posts in concrete at full depth and match the picket spacing and top rail style to the existing fence so the new gate doesn’t look bolted-on.
Sliding Gate Installation
Sliding gates are the right answer for a large share of Burbank driveways, particularly where the driveway slopes up from the street or where a swing gate would block the sidewalk. Along Riverside Drive and the streets feeding the studio lots, slide gates also clear vehicle traffic faster, which matters when a driveway serves more than one household. We install rack-and-pinion slide gates with track or cantilever systems, sized to the gate leaf weight and the daily cycle count. On a shared driveway, we configure the operator and safety edges so both households retain independent access while the gate is mid-cycle.
Swing Gate Installation
Swing gates remain the classic look on Burbank’s older homes, and for good reason: a well-hung wrought-iron double swing gate on brick pillars suits a 1940s ranch better than anything else. The failure point here is almost always the post. In Burbank’s clay-heavy soil, a post set at 24 inches with a standard anchor will start walking within a year or two, especially if a trailer or delivery truck clips the gate stop. We dig footings to 36 inches on swing gate posts in this city, and we use heavier wall tubing on the gate frame than the big-box pre-fab panels offer.
Double Gate Installation
Double gates in Burbank fall into two camps: a matched pair of swing leaves on a residential driveway, or a wide vehicle gate needed for horse trailers and service access in the Rancho Equestrian District. The Rancho gates are their own animal. The city’s zoning overlay requires double-swing gates wide enough for a horse trailer to clear, and the post footings have to be oversized because the clay-heavy soil near the LA River heaves with the seasons. This is a spec we rarely see even two miles east in Glendale. We pour those footings to 36 inches or deeper, and we set the hinge posts with a slight inward rake so the gate leaves meet true when the operator closes them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
Our technicians are factory-trained and equipped for nine gate-automation brands, and on Burbank jobs we commonly work with Viking, DoorKing, and Elite operators. We stock common boards, limit switches, and remote receivers for these brands in our Los Angeles office, which keeps turnaround tight when a Burbank call needs a part the same week. If you already have an operator you like, we’ll install the gate around it and make sure the limits, safety edges, and keypad talk to it correctly.
Common Gate Installation Problems We See in Burbank Homes
- Posts walking in clay soil. Burbank sits on expansive clay that swells with winter rain and contracts in the summer dry heat. A gate post not set deep enough will lean within a season, throwing the gate off-latch and binding the operator. We set posts at 36 inches or deeper on every Burbank install.
- Heat-fatigued operators. Burbank regularly tops 105°F in summer, and an operator mounted on a black metal post in full sun can overheat and shut down. We mount operators on the shaded side or inside the gate frame where possible, and choose motors rated for the thermal load.
- Santa Ana wind damage. The same hot, dry wind that funnels through the Verdugo Mountains in fall pushes cantilever gates off their rollers and springs hinge-pin gates open at the latch. Our installs include wind-rated stops and drop rods on swing gates, and roller guards on slide gates.
- Shared driveway access conflicts. A surprising number of Burbank properties share a driveway, especially in the older residential blocks. A new gate has to keep both neighbors’ access working during and after installation. We stage our work so at least one entry path stays clear, and on slide gates we position the operator and photocells to keep pedestrian access open at all times.
Pricing for Gate Installation in Burbank, CA
Here’s what gate installation in Burbank costs, based on the work we’ve quoted across this city’s neighborhoods:
- Pedestrian gate: $1,200-$2,800 installed, depending on width, post condition, and whether a lock or keypad is included.
- Single swing driveway gate with operator: $3,500-$7,500.
- Double swing driveway gate with operator: $5,500-$11,500, with the high end reflecting the heavier posts and wider leaves Burbank’s Rancho District requires.
- Sliding gate with rack-and-pinion and operator: $4,500-$10,000, depending on track or cantilever design and gate weight.
The price we quote is the price you pay. We settle the number before a single bolt is turned, and the written estimate names every post depth, operator, and safety device. If an unknown condition appears once we excavate, we stop and talk to you before we do anything else. Call (925) 693-7978 for a free on-site measure and a written quote.
We Also Serve Cities Near Burbank
Our Gate Installation in Burbank crews regularly work the neighboring communities of Glendale, North Hollywood, Sun Valley, and Tujunga. If you’re a few blocks over the city line, call us; the same crew, the same written quote, and the same 90-Day Done Right Promise apply.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burbank
Every 90 days, at minimum. Burbank’s studio-corridor gates along Riverside Drive and Buena Vista Street run 300+ cycles a day during production, compared to about 20 on a residential driveway. That workload burns through limit switches and circuit boards on a compressed timeline, and a quarterly service call catches a failing component before it locks a production vehicle out. We service Viking, DoorKing, and Elite operators, and we stock the parts that fail most on Burbank’s high-cycle gates. Call (925) 693-7978 to set up a service schedule.
Because the clay-heavy soil near the LA River heaves seasonally, and a horse trailer clipping the gate stop exerts enormous leverage on the hinge post. Burbank’s Rancho zoning also requires gate widths that clear trailers, which means longer, heavier leaves acting on the post. A standard 24-inch footing will work loose within a year. We pour Rancho gate post footings at 36 inches or deeper, often with a wider concrete collar. For a gate that will still swing true a decade from now, call (925) 693-7978.
Yes, but the panel and battery need to be sized for Burbank’s sustained 105°F-plus conditions, and the panel should be mounted where it gets morning sun but avoids the harshest afternoon glare on a hot metal post. A solar operator on a shared driveway with moderate daily use can work year-round here; on a high-cycle gate or one that runs after dark regularly, a hardwired operator is more dependable. We’ll size the system honestly and tell you if solar won’t hold up for your use pattern.
For most Burbank slide gates, a keypad and photocells will handle the basics, but a loop detector makes a real difference on shared driveways and on any gate that a vehicle exits through regularly. The loop reads the metal of a car at the gate and holds it open until the vehicle clears, which prevents the gate from sliding into a car that stopped mid-exit. On a shared driveway off a street like North Parish Place, we consider a loop detector standard. We’ll quote it as a line item, not a surprise.
Burbank runs 10 to 18 percent higher than Sun Valley or Tujunga for the same gate, driven by the city’s stricter inspection requirements, the prevalence of clay soil that demands deeper footings, and a housing stock of older homes where existing pillars and sidewalks constrict the working space. Glendale and North Hollywood are close to Burbank pricing. The quote you get from us reflects the actual site, not a flat-rate chart.
Call Ironworks Gate Co. for Gate Installation in Burbank
If you live in Burbank and you’re tired of guessing whether a contractor will show up, do the work right, and stand behind it, call us. Victor Salinas and the whole crew at Ironworks Gate Co. will measure your driveway or pedestrian path, talk straight about what you need and what you don’t, and put a written price in your hand. Every job is backed by our 90-Day Done Right Promise, and every phone call is answered by a person, 24 hours a day, 7 days a week. Call (925) 693-7978 for a free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank and the surrounding communities.