Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Burbank, CA | Ironworks Gate Co.
We provide independent Ghost Controls gate opener repair across Burbank, from the ranch homes south of Glenoaks to the horse properties in the Rancho Equestrian District. If you’re looking for broader Gate Repair in Burbank, we handle that too. What makes our Ghost Controls work different here is simple: Burbank’s extreme summer heat, shifting clay soil near the LA River, and studio corridor gate cycles all hit Ghost Controls equipment in ways you won’t see in Glendale or North Hollywood. If your Ghost Controls opener is stalling, grinding, or refusing to close, call (925) 693-7978 for a straight answer and a free estimate.
Why Burbank Residents Choose Us for Ghost Controls Service
Victor Salinas, our owner, spent four decades learning every gate system this valley has to throw at a person, and Ghost Controls has been part of that work since the brand became a staple on Burbank driveways. We’re not the manufacturer and we don’t pretend to be. We’re Ghost Controls sales & service specialists who diagnose and fix what’s actually wrong, whether it’s a TSS1 single swing opener or a TDL2 slide system on a commercial entrance. A gate should open when you need it to and stay closed when you don’t. Everything else is just the work.
Our techs carry OEM Ghost Controls boards, motors, and limit switches on the truck, and we’ve already seen the failures Burbank’s climate produces. That’s the difference between a generic repair call and a fix that holds through the next 105-degree week.
Common Ghost Controls Gate Repair Problems We Solve in Burbank
- Control board failure from heat exposure. Burbank sits deep in the San Fernando Valley with no marine layer, and summers routinely pass 105°F. Ghost Controls control boards on gates with southern exposure and no shade cook in that heat. We replace burned boards with genuine Ghost Controls parts and reposition or shield the housing so the same board doesn’t fail again next August.
- Limit switch burnout on high-cycle gates. Studio lots and production entrances along Riverside Drive and Buena Vista run their gates around the clock. A Ghost Controls limit switch that would last a decade on a residential driveway can burn out in two or three years at that cycle count. We keep replacements stocked and recalibrate travel arcs on the spot.
- Motor capacitor failure during heat waves. When the temperature climbs above 105, a Ghost Controls motor running continuous duty draws more current, and the capacitor is usually the first component to give out. The symptom is a hum with no movement, or a gate that starts and stops mid-travel. It’s a straightforward fix, and we verify the windings before assuming the capacitor is the whole story.
- Solenoid latch damage from Santa Ana winds. Fall wind events funnel through the Verdugo Mountains and slam against swing gates across Burbank. The gusts force the gate leaf against the strike, bending the solenoid pin or snapping the latch spring. We straighten, replace, and adjust so the next wind event doesn’t leave your gate swinging open at 2 a.m.
- Hinge post misalignment on equestrian properties. In the Rancho Equestrian District, clay-heavy soil near the LA River swells and shrinks with the seasons, shifting hinge posts and causing Ghost Controls openers to bind or stall. We reset posts in concrete and realign leaves before recalibrating the opener, because recalibrating around a shifted post just buys you a few months.
Ghost Controls Service in Burbank: What Local Conditions Mean for Your Equipment
The Rancho Equestrian District on Burbank’s west side is the clearest example of how local soil changes the repair job. Hundreds of horse properties there use double-swing gates wide enough for trailers, and the clay-heavy soil near the LA River expands and contracts with moisture. Posts shift an inch or more over the course of a season. A Ghost Controls TDS2 dual swing opener doesn’t know the post moved; it just knows the leaf won’t swing true, so the limit switch trips early and the gate stops halfway. This soil movement pattern isn’t something our techs see on calls in Glendale or North Hollywood. It’s a Burbank condition, and it means post and hinge reinforcement is a routine part of Ghost Controls repair work here, not an add-on. Our tech worked on a TDS2 at a Rancho Equestrian home where the left leaf had stopped opening fully. The hinge post had shifted over an inch in the expansive clay, the limit switch was tripping early, and the gate had been misbehaving for months. We reset the post in concrete, realigned the leaf, replaced the worn switch, and recalibrated the control board for the correct arc of travel. That gate opens like it should now, and the fix will hold because we addressed the soil, not just the switch.
Ghost Controls Models & Products We Service in Burbank
We service the full residential Ghost Controls lineup: the TSS1 single swing gate opener, TDS2 dual swing, TSL1 single slide, and TDL2 dual slide. For discontinued units, we source aftermarket components only after confirming fit and voltage, and we’ll always tell you plainly whether a repair or a replacement makes more sense for your gate and how you use it. We keep common Ghost Controls boards, motors, and limit switches stocked locally so most Burbank repairs happen in a single visit, not after a week of waiting on parts.
Ghost Controls Service Pricing in Burbank
Here’s what Ghost Controls repair typically costs in Burbank. These are the ranges we quote before any work begins, and the price is agreed on in writing first.
- Service call and diagnostic: $75-$120, credited toward the repair if you proceed.
- Limit switch replacement: $150-$260.
- Control board replacement: $220-$430, depending on the model and board version.
- Motor capacitor replacement: $95-$180.
- Solenoid latch repair or replacement: $120-$240.
- Hinge post reset and realignment (common on Rancho properties): $180-$400, depending on post size and concrete work.
What drives the price is parts cost, complexity, and whether the post or mounting plate needs rework. Every job includes a written quote before a single bolt is turned. Call (925) 693-7978 for a free estimate on your Ghost Controls repair in Burbank.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Burbank
Yes. Burbank’s regular stretches above 105°F accelerate capacitor and control board failures on Ghost Controls units with southern exposure and no shade. The heat doesn’t damage every component equally, but it shortens the life of boards and capacitors noticeably. If your opener starts acting up during a heat wave, shut it off and call us. A failing capacitor left running can take the motor with it. Call (925) 693-7978 for a diagnostic visit.
Yes, and it’s a common fall call in Burbank. Wind gusts coming through the Verdugo Mountains push against the gate leaf hard enough to bend latch pins, snap springs, or derail slide gates. We straighten, replace, and realign, then test the gate through a full cycle to make sure the opener’s travel arc still matches the physical gate. Call (925) 693-7978 and we’ll schedule the repair.
On Rancho Equestrian District properties, the usual culprit is a hinge post that has shifted in the clay-heavy soil near the LA River. The opener’s limit switch trips early because the gate leaf no longer swings on its original arc. The fix is resetting the post and recalibrating the board, not just replacing the switch. We do this work regularly across Burbank. Call (925) 693-7978 for an on-site assessment.
We do. Studio and production facilities along Riverside Drive and Buena Vista run gates that cycle constantly, and we’re set up to handle commercial Ghost Controls slide operators with high-cycle limit switch and board work. We also offer our Gate Installation in Burbank when replacement makes more sense than repair. Same visit when parts are in stock, and the same written quote before we start.
Yes. Ghost Controls openers accept accessory inputs for external access control, and our electrician-grade techs wire card readers and video intercoms into the opener’s control terminals. We verify compatibility and test the full sequence before we leave. Call (925) 693-7978 to talk through your setup and schedule a walkthrough.
Service Areas Near Burbank
Ironworks Gate Co. serves Burbank and the surrounding San Fernando Valley. If your property sits a few blocks outside the city line, we cover Ghost Controls service in Glendale, Ghost Controls service in North Hollywood, Studio City, Sun Valley, and Tujunga. For the broader area, see our Burbank service area page. If you’re not sure whether we cover your street, call and ask.
Book Your Ghost Controls Service in Burbank Today
Call (925) 693-7978 and a live person will answer, 24 hours a day. We’ll schedule your Ghost Controls repair in Burbank, give you a free estimate, and put the price in writing before we turn a single bolt.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank since 1984.