Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Burbank
Gate repair in Burbank is not a one-size-fits-all job. Between the studio corridor along Riverside Drive, the equestrian properties on the west side, and neighborhoods full of 1950s ranch homes with original ironwork, our technicians see a wider range of gate failures in a single week than many companies see in a year. We respond to Burbank service calls six days a week, most repairs are completed in a single visit, and a live person answers the phone at (925) 693-7978 day or night. If your gate is sagging, stalled, or refusing to close, call us. We will be there when we say.
Why Ironworks Gate Co. Is Burbank’s Preferred Gate Repair Company
Ironworks Gate Co. has been repairing driveway and estate gates for over 42 years, and our work in Burbank has taught us this city’s quirks: the adobe-heavy soil near the LA River, the Santa Ana winds that funnel through the Verdugo Mountains, and the studio-adjacent gates that run hundreds of cycles a day. We are not a handyman service dabbling in gates. We weld, we wire, and we rebuild, and every job is protected by a written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard, applied to every job.
Victor Salinas, who leads our team, built the Burbank service route around one principle: a gate that closes poorly is a gate that will fail completely, usually at the worst moment. That is why we stock common parts for the gate brands found on Burbank properties, why our technicians arrive in uniform and background-checked, and why we quote a firm price before a single bolt is turned. The 400th job gets the same care as the first.
Our Burbank customers consistently tell us two things. First, they appreciate that someone actually picks up the phone. Second, they appreciate that we do not disappear after the bill is paid. Both are still true, every day.
Key Takeaways
- Local crews familiar with Burbank’s soil, wind, and studio-corridor gate demands
- Most gate repairs finished in one visit, with the price settled before work starts
- Written 90-Day Done Right Promise on every job
- Live person answers (925) 693-7978, 24 hours a day, 7 days a week
Our Gate Repair Services in Burbank
Electric Gate Repair
Electric gate repair in Burbank skews heavily toward operators that have simply given out under the load. Between the summer heat that pushes triple digits and the studio-adjacent properties that cycle their gates dozens of times per shift change, circuit boards and limit switches in Burbank fail faster than in any neighboring city we serve. We diagnose the board, the motor, and the safety sensors in one visit, and we carry replacement parts for Viking, Ghost Controls, DoorKing, and Elite operators. See our full Gate Repair scope for more on how we handle electrical failures.
Automatic Gate Repair
An automatic gate that will not open, will not close, or reverses halfway through the travel usually has one of three problems here: a misaligned photo eye, a loop detector that has drifted out of calibration, or a motor capacitor cooked by Burbank summer heat. On many Burbank streets, especially those with shared driveways, an automatic gate that behaves unpredictably is a real safety concern. We test the full travel cycle, re-align the sensors, and replace the failed component rather than patching around it.
Hinge & Post Repair
The single most common failure on original wrought-iron swing gates in Burbank’s ranch-home neighborhoods is a hinge post that has rotted just below grade. The adobe-heavy soil holds moisture against the post for months after the rain stops, and the gate sags until the latch no longer lines up. Welding the hinge or shimming the latch does not fix it. The post footing has to be replaced. We re-core the footing, set steel posts where the original wood has failed, and hang the gate so it swings true. In the Rancho Equestrian District, where double-swing gates are wide enough for horse trailers, a failed post can make the entire property unusable. We get those gates swinging again, often the same day.
Gate Realignment
Sliding gates in Burbank take a beating from the Santa Anas. When a gust racks the gate off its track, the rack and pinion misalign and the motor stalls mid-travel. It sounds catastrophic, and it looks worse than it is, but the repair is straightforward for a crew that knows what to check: track brackets first, then the pinion engagement, then the limit switches. We realign the gate, reset the travel limits, and usually have it running before we leave the driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We service and stock parts for nine major gate-automation brands, including Viking, Ghost Controls, and DoorKing. That matters in Burbank because gate openers installed across this city span forty years of technology, from early linear-arm swing operators on Magnolia Park bungalows to modern crash-rated slide operators on studio back lots. A technician who only knows one brand will tell you to replace everything. We would rather fix what you have, correctly, the first time.
Common Gate Repair Problems We See in Burbank Homes
- Loop detectors drifted out of calibration along the studio corridor. The 24/7 truck traffic on Riverside Drive and Buena Vista Street beats the tar out of in-ground loop detectors. The gate starts ignoring authorized entry cards or holds open during shift changes. We recalibrate or replace the loop, and the gate goes back to behaving.
- Santa Ana wind damage to sliding gates. Gusts funneled through the Verdugo Mountains hit cantilever and roller gates hard. The gate racks off the track, the pinion skips, and the whole thing stalls. We see it most often on north-facing properties across the hillside streets.
- Rotted hinge posts on 1950s ranch-home gates. The original posts on many Burbank ranch properties are wood, set in adobe-heavy soil, and they rot just below grade. The gate sags, the latch binds, and tightening the hinge only makes it worse. We replace the post properly, with steel, and re-core the footing.
- Motor burnout from valley heat. Burbank regularly exceeds 105°F in summer, and that heat cooks operator capacitors and burns out motors faster than anyone wants to admit. We replace the failed motor with one rated for the duty cycle, and we check the venting on the housing so it does not happen again in August.
Pricing for Gate Repair in Burbank, CA
A typical electric gate repair in Burbank runs between $180 and $420, depending on what failed and whether we are replacing a sensor, a capacitor, or a circuit board. Hinge and post repair on a standard single swing gate usually lands between $275 and $600, with the wide double-swing gates in the Rancho Equestrian District running higher. Gate realignment on a sliding gate ranges from $180 to $350, and full operator replacement starts around $800 and goes up based on the gate’s size and duty cycle.
Every quote is firm, written, and agreed before we start. No surprise line items, no “materials adjustment” after the fact. We also offer a $50 discount on any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% senior and veteran discount, always. Call (925) 693-7978 for an exact quote. Estimates are free, and you will speak to a person, not a voicemail tree.
We Also Serve Cities Near Burbank
Our crews cover the wider San Fernando Valley and surrounding neighborhoods, including Glendale, North Hollywood, Sun Valley, and Tujunga. If you are looking for Gate Repair in Burbank or anywhere nearby, the same team, the same guarantee, and the same live-answer phone number apply. Dispatch and scheduling for Burbank jobs are coordinated from our Los Angeles office, with local crews staged throughout the Valley to keep response times short.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burbank
Because the production schedules never stop. Studio back-lot entrances and production facilities along Riverside Drive and Buena Vista Street run their gates hundreds of cycles a day, every day of the year, and the control boards are simply not built for that duty cycle. A residential board that would last a decade in a Glendale hillside home might last eighteen months on a studio-corridor gate in Burbank. The fix is usually a replacement board rated for continuous duty, plus a heat shield if the housing gets direct afternoon sun. Call (925) 693-7978 and we can assess whether your board is worth repairing or truly needs replacement.
Yes. This is one of our most common Burbank repairs. The wind loads come through the Verdugo Mountains and hit north-facing properties hard, racking the gate off its roller track and leaving the pinion misaligned. We re-track the gate, reset the rack and pinion engagement, add or replace wind stops where the gate needs them, and re-test the motor under full travel. If the gate is light for its width, we may recommend adding ballast or upgrading the roller trucks. Estimates are free.
Rotted hinge posts. The clay-heavy soil near the LA River holds water against the post footing for months, and the original wood posts on those wide double-swing gates eventually rot below grade. The gate sags, the latch binds, and the gate leaves the safety sensors misaligned. We replace the rotted post with steel, re-core the footing, and re-hang the gate so the trailer clearance stays full-width without losing entrapment protection. It is a bigger job than a hinge weld, but it actually stays fixed.
The photo eyes. In Burbank, the afternoon sun angle combined with a gate that has shifted slightly on its posts can put the safety beam out of alignment, and the opener reads that as an obstruction and reverses. Look for a blinking light on the sensor, check that the lenses are clean, and make sure nothing has grown or shifted in front of them. If the sensors are aligned and clean, the problem is usually the control board’s force settings or a failing limit switch. We can diagnose it on site. Call (925) 693-7978 and we will sort it out.
Yes. Burbank summers regularly top 105°F, and keypad housings that sit in direct sun all day do not last as long as the manufacturer claims. We see cracked keypads, faded buttons, and failed internal contacts on gates across the city every August. We replace or repair the keypad, and when the mounting location is the problem, we will suggest moving it to a shaded face of the post so you are not paying for the same repair again next summer.
Call Ironworks Gate Co. for Gate Repair in Burbank
If your gate is stuck, sagging, or making a sound it did not make last week, do not wait for it to fail completely. Call Ironworks Gate Co. at (925) 693-7978 and speak to a live person. We serve Burbank six days a week with emergency availability around the clock. The price is quoted and agreed before any work starts, and every job is backed by the written 90-Day Done Right Promise. A square deal, done right, and backed in writing. That is how we have done it for over 42 years, and that is how we will do it on your gate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Burbank and the San Fernando Valley since 1984.