Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tujunga
A new driveway gate in Tujunga typically costs between $2,400 and $11,000 installed, depending on the gate’s width, material, and whether you’re adding automation. Most standard single swing gates land in the $2,400 to $4,500 range, while a 16-foot double swing gate with a solar opener on a hillside lot runs closer to $6,500 to $11,000. We quote the full price before any work starts, so the number on your invoice matches the number you approved. Call (925) 693-7978 for a free estimate on your gate installation in Tujunga.
Tujunga isn’t Burbank or North Hollywood. The lots are bigger, the driveways are longer, and the wind coming through Big Tujunga Canyon tests every hinge, post, and operator you put in the ground. Our Gate Installation team has seen what happens when a gate built for flatland conditions meets a Tujunga Santa Ana event, and we plan for it from the first bolt.
Why Ironworks Gate Co. Is Tujunga’s Preferred Gate Installation Company
Ironworks Gate Co. has been putting gates in the ground for over 42 years, and the jobs we take in Tujunga get the same standard as every other job we’ve ever done: done right, backed in writing. Homeowners on Apperson Street, Foothill Boulevard, and the hillside lots off Tujunga Canyon Boulevard call us because they’ve already been through the cycle of cheap installs that sag, bind, or stop responding after one windy fall.
The difference is simple. We’re gate specialists, not general contractors who happen to hang a gate between two posts. Our technicians are background-checked, uniformed, and trained on nine automation brands, including FAAC, BFT, and Linear. When we install a gate in Tujunga, we’re sizing it for the canyon wind, the fire-access code, and the reality of living against the Angeles National Forest.
Victor Salinas leads our crews, and the K.E.Y.S. code he’s drilled into every technician, Krafted right, Every time, Your home first, Standing behind it, is why our Tujunga customers keep our number saved. We will be there when we say. And if something isn’t right, our 90-Day Done Right Promise means we come back and make it right, every time, on every job. No paperwork, no arguing.
Our Gate Installation Services in Tujunga
Driveway Gate Installation
Most Tujunga driveways don’t fit a stock-width gate. The lots are semi-rural, the driveways flare out toward the street, and the finished opening often measures 12, 14, or 16 feet. We build and hang driveway gates to the exact opening, whether that’s a single panel or a double leaf. For hillside approaches off Wentworth Street or along the base of the Verdugo Mountains, we account for grade changes that make a standard level hinge-line install useless. A typical driveway gate installation in Tujunga runs $2,800 to $7,500, depending on width, material, and automation.
Pedestrian Gate Installation
A pedestrian gate on a Tujunga property does two jobs. It gives you a daily path that doesn’t require cycling a 16-foot driveway gate, and it gives the fire department a manual access point that many hillside lots otherwise lack. We install pedestrian gates that match the driveway gate’s material and finish, sized for the path you actually walk, not the path a developer imagined fifty years ago. Most pedestrian gate installs in Tujunga run $900 to $2,200.
Sliding Gate Installation
On steep Tujunga lots where a swing gate would need to fight gravity on every cycle, a sliding gate is often the right answer. The gate rides on a track or cantilever system instead of swinging on hinges, which matters when the driveway climbs toward the house. Sliding gates also hold up better against canyon gusts because the wind can’t lever against a hinge post the way it does on a swing leaf. Sliding gate installation in Tujunga generally runs $3,200 to $9,000, with cantilever styles at the higher end.
Swing Gate Installation
Swing gates remain the most common style on Tujunga’s 1940s-era ranch homes and hillside bungalows, and for good reason. They’re simple, they fit wider openings cleanly, and they can handle the kind of ornamental wrought-iron look that matches older houses. The critical part in Tujunga is the post footing. We pour gate post footings 36 inches deep minimum, often deeper on hillside lots where soil shifts during the rainy season. Swing gate installation in Tujunga runs $2,400 to $6,500 for a single leaf, more for doubles and automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tujunga
We install and service automation from FAAC, BFT, and Linear, and we keep common replacement parts for those brands stocked on our trucks when we’re working Tujunga jobs. That matters because a gate operator that fails during a Santa Ana event can’t wait a week for a part to ship. If you have an existing opener from another brand, our technicians are factory-trained on nine automation lines total, so we can match the replacement motor to what’s already on the gate or start fresh with a system sized for your property.
Common Gate Installation Problems We See in Tujunga Homes
- Wind-racked frames on swing gates. Santa Ana winds funneling through Big Tujunga Canyon push against gate leaves until the hinge post shifts in its footing. Once the post moves even half an inch, the gate starts dragging on the latch side, and no hinge adjustment fixes the actual problem.
- Shallow post footings from original 1940s to 1970s installs. Older Tujunga homes often have ornamental gates sitting in footings poured 18 to 24 inches deep. Seasonal rain softens the surrounding soil, the post heaves, and the gate starts sagging within a season or two of being “fixed.”
- Ash-damaged operator enclosures. After active fire seasons near Big Tujunga Canyon, we see a wave of Tujunga calls where operator control boards have fried without the fire ever reaching the property. Fine ash works its way into motor housings during weeks of smoky conditions, and then weeks of evacuation-and-return cycling finish the board off.
- Fire-access compliance failures. Tujunga sits inside a Very High Fire Hazard Severity Zone, which means automated gates must have emergency responder access capability, typically a Knox-Box or fire-department-compatible switch. Flatland contractors rarely install these, and the first time many Tujunga homeowners learn about the requirement is when an inspector flags it.
Pricing for Gate Installation in Tujunga, CA
Here’s what we quote for Tujunga jobs:
- Pedestrian gate, manual: $900 to $2,200
- Single swing driveway gate, manual: $2,400 to $4,500
- Double swing driveway gate, manual: $4,000 to $7,500
- Sliding driveway gate, manual: $3,200 to $6,500
- Swing or sliding gate with solar automation: add $1,800 to $3,500
- Swing or sliding gate with AC automation: add $1,500 to $2,800
Every estimate is written and confirmed before we order materials or touch a tool. If the scope changes mid-job, the price change is agreed in writing before that work happens. Call (925) 693-7978 and we’ll walk the site with you, measure the opening, check the grade, and hand you a number you can take to the bank.
We Also Serve Cities Near Tujunga
Our Tujunga crews work the surrounding foothill and Valley communities as well. We install gates in Burbank, Sun Valley, Glendale, and North Hollywood, and we stock the same hardware on our trucks whether we’re on Foothill Boulevard or heading down toward the Valley floor.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tujunga
Does a solar gate opener actually hold up during Tujunga’s Santa Ana wind season?
Yes, when it’s sized correctly. A solar gate opener in Tujunga needs a battery bank large enough to keep the operator running through days of heavy wind cycling and overcast skies, not just a panel and a tiny sealed battery. We size battery banks to handle a week of Santa Ana conditions without the gate sagging or stalling mid-cycle. For a 16-foot double swing gate, that generally means a deep-cycle battery bank paired with a panel rated above the operator’s draw. Call (925) 693-7978 for a solar readiness evaluation on your Tujunga property.
What fire department hardware is required for an automated gate in Tujunga?
Tujunga sits inside a Very High Fire Hazard Severity Zone at the mouth of Big Tujunga Canyon, so automated driveway gates must provide emergency responder access, typically through a Knox-Box key switch or fire-department-compatible override mounted at the property line. The requirement is part of the Los Angeles fire-access code, and an inspector will flag it if it’s missing or wired wrong. We install the correct hardware and wire it so the gate opens on fire department key without bypassing your normal entry system.
Why do gate operators near Big Tujunga Canyon fail after wildfire smoke even when the fire never reached the property?
Fine ash works into the operator enclosure during weeks of smoky conditions, coating the control board and motor contacts. Then the heavy use cycle of an evacuation and return finishes the job. The board corrodes, shorts, and the operator goes dead. It’s a failure pattern we see repeatedly in Tujunga after active fire seasons, and the fix is a sealed enclosure, regular board cleaning, and replacing components before they fail. Our seasonal tune-up, $89, includes ash inspection for Tujunga customers.
How deep should a gate post footing be on a Tujunga hillside lot?
Thirty-six inches minimum, and often deeper. Tujunga’s hillside soil shifts during the rainy season, and the original shallow footings on 1940s to 1970s gates let the post heave until the gate drags. We pour footings at 36 inches deep on flat lots and adjust deeper on slopes, using concrete that matches the load and wind exposure of the specific gate. Cutting this corner is why so many Tujunga gates sag within a year or two of install.
Can I keep my 1950s wrought-iron gate but add an automatic opener in Tujunga?
In most cases, yes. The gate leaf itself is usually serviceable if the frame isn’t rusted through, but the hinge posts and the hinge hardware usually need replacing or reinforcing before an operator goes on. We also check the gate’s weight against the operator you want so the motor isn’t overworked from day one. If the gate is worth keeping, we’ll build the automation around it, and we’ll tell you straight if the iron is too far gone to justify the cost.
Call Ironworks Gate Co. for Gate Installation in Tujunga
Tujunga’s wind, hills, and fire-access code make gate installation here a different job than anywhere else in the Valley. We plan for all three from the first site visit. You’ll get a written quote before any work starts, a live person on the phone any hour you call, and a 90-Day Done Right Promise in writing when the job’s complete.
Call (925) 693-7978 for a free gate installation estimate in Tujunga. We’ll answer the phone, schedule a site visit, and hand you a number you can plan around.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tujunga and surrounding communities since 1984.