Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Los Feliz
Gate repair in Los Feliz usually costs between $180 and $650 depending on what failed. Most hinge, post, and realignment work runs $180-$340, while operator and circuit board replacements on automatic gates run $450-$850. We’re the team homeowners call when a gate has been sagging for months, or when a Santa Ana wind leaves a vintage iron gate twisted on its hinges. Call (925) 693-7978 and you’ll get a live person who can have a technician at your Los Feliz property fast.
Why Ironworks Gate Co. Is Los Feliz’s Preferred Gate Repair Company
Ironworks Gate Co. has been in the gate business for over 42 years, founded in 1984. We’re not a generalist handyman service that occasionally hangs a gate. We work exclusively on driveway and estate gates: repair, installation, motors and openers, access control, and parts and welding. Our Gate Repair team handles everything from a bent hinge post to a full automation system that stopped responding.
For Los Feliz homeowners, what matters is that we know this neighborhood’s gates. The hillside estates along Los Feliz Boulevard and up in Los Feliz Hills hold some of the oldest ornamental ironwork in the city. A lot of it is 70 to 100 years old. That’s not a problem for us, but it is a problem for a technician who has only ever installed prefab aluminum panels on flat lots. We’re the company that makes a 40-year-old gate close like the day it was hung.
Every job comes with our 90-Day Done Right Promise, in writing. No paperwork to chase, no arguing. If it’s not right, we come back and make it right. That’s the Keystone Standard, and it applies to every single job we do in Los Feliz, from a small hinge replacement to a full estate gate restoration.
Our Gate Repair Services in Los Feliz
Electric Gate Repair
Electric gate repair in Los Feliz typically runs $250-$650. When an operator fails on a hillside property, the issue is often a burned-out motor from repeated wind resistance. Santa Ana winds funneling out of Griffith Park’s canyons push against solid infill panels, forcing the motor to work harder than it was designed to. We diagnose the actual fault: motor, capacitor, control board, or limit switch – and we service nine major brands including LiftMaster, FAAC, and Mighty Mule, so whatever is on your driveway, the correct fix happens on the first visit.
Automatic Gate Repair
Automatic gate repair in Los Feliz runs $300-$800 depending on the operator and whether the safety system needs recalibration. On raked driveways, which are common throughout Los Feliz Hills, the photocells and safety edges have to be positioned for the gate’s slope geometry. A gate that binds partway through its travel, or reverses for no reason, is often a sign of misaligned safety sensors on a sloped track. We recalibrate the full entrapment protection system to manufacturer spec, then test it under load.
Hinge & Post Repair
Hinge and post repair in Los Feliz runs $220-$550. The saturated ground we get after intense winter deluges shifts post footings on hillside driveways with poor drainage. A post that’s out of plumb by even half an inch over a six-foot gate leaf will bind at the latch. We dig out the footing, re-set the post in concrete, and realign the gate so it swings true. On ornamental iron gates from the 1920s and 1930s, we also replace worn hinge pins and rebuild strap hinges in place rather than tearing out period ironwork.
Gate Realignment
Gate realignment in Los Feliz runs $180-$340. This is the most common repair on older Los Feliz properties, and it’s where we fix what wind and gravity have shifted over the years. A sagging gate drags at the latch side, wears out the hinges, and eventually stresses the operator if one is installed. We bring the gate back to level, adjust the gap at the hinge and latch stiles, and confirm full travel without binding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Feliz
We’re factory-trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Los Feliz driveways are split between older estate swing gates and newer slide-gate installations, which means we see nearly every brand in a typical month. That’s why we stock the most common boards, remotes, and safety sensors for LiftMaster and Elite operators locally. Most jobs are completed in a single visit, with no-hassle upfront pricing settled before a single bolt is turned.
Common Gate Repair Problems We See in Los Feliz Homes
- Santa Ana wind damage on exposed hillside driveways. Winds funneling out of Griffith Park’s canyons regularly bend lighter gate panels, strip hinges, and overload operators. Solid infill gates act like sails in these conditions. We specify heavier hinge posts and reinforced panel framing on exposed Los Feliz Hills properties.
- Post footings shifting after winter deluges. The rains are rare but intense here, and hillside driveways with marginal drainage saturate the soil around post footings. A shifted post knocks the gate out of plumb and it starts binding. We re-set the footing and re-grade the surrounding area to shed water away from the post.
- Raked-gate geometry miscalculations on cross-slope driveways. On steep cross-slope driveways throughout Los Feliz Hills, such as those along Glendower Avenue, a standard flat-ground swing gate won’t clear the grade. The gate has to be a raked (parallelogram) gate or a sloped-track slide gate. First-time installers miss this every time. We don’t.
- Vintage ornamental iron fatigue. The 1920s through 1940s Spanish Colonial Revival and Mediterranean estates along Los Feliz Boulevard and in Los Feliz Estates have original wrought iron gates that are now 70 to 100 years old. Rust weakens the lower rail joints, and decades of use have stretched hinge pins. We repair, weld, and restore in place, or fabricate period-accurate replacement panels when a section is beyond saving.
Pricing for Gate Repair in Los Feliz, CA
Here’s what Los Feliz homeowners can expect to pay for common repairs. Gate realignment and hinge adjustments run $180-$340. Hinge and post repair runs $220-$550, depending on whether the post footing needs to be re-set. Electric gate repair runs $250-$650, and automatic gate repair with operator replacement runs $450-$850. Custom fabrication work, such as building a raked gate to match 1920s ornamental iron, is quoted per project after we measure your driveway and slope.
Every price is quoted and agreed before any work starts. You’ll know the number before we turn a bolt. We offer a free second opinion on any written estimate from another company, and $50 off any repair over $250. Seniors and veterans always get a 5% discount. Call (925) 693-7978 and we’ll talk through what you’re seeing, and give you an honest range for what it should cost.
We Also Serve Cities Near Los Feliz
Our Gate Repair in Los Feliz teams also cover North Hollywood, Burbank, Glendale, and Studio City. If you’re just over the border in any of those neighborhoods, the same technicians, the same written guarantee, and the same 90-Day Done Right Promise apply.
Serving Los Feliz, CA - Our Local Coverage Area
We’re based in the Los Feliz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Los Feliz
Santa Ana wind events push against solid infill gate panels with surprising force on exposed hillside driveways, bending the panel frame, stripping hinge screws or pins, and overloading operators to the point of motor burnout. Homes in Los Feliz Hills and Los Feliz Estates catch the worst of it because the canyons funnel and accelerate the wind. If your gate is more than an inch out of plumb after a wind event, the hinges and hinge post have likely been compromised, and running the operator on a damaged gate only adds damage. Call (925) 693-7978 and we’ll give you an honest assessment of whether it’s a realignment or a full hinge and post repair.
The safe manual-release procedure is to pull the release handle or turn the release key on the operator, which disconnects the motor from the gate so you can move it by hand. On LiftMaster and FAAC operators, look for a small pull cord or keyed release on the side of the motor housing. If your gate is on a slope, be prepared for the gate to try to roll or swing downhill once released – keep a firm grip and do not stand downhill of the gate leaf. We can show you how to do this safely on your specific operator, and we recommend labeling the release point so it’s findable in the dark. If you’re not comfortable doing this yourself, call us – a live person answers 24 hours a day, 7 days a week.
A standard swing gate won’t clear a steep cross-slope driveway because the gate leaf travels in a flat arc, and if the ground rises or falls across the gate’s swing path, the low side of the gate will hit the ground before the gate reaches full open or closed position. On cross-slope driveways throughout Los Feliz Hills, including along Glendower Avenue, the fix is to spec a raked (parallelogram) gate whose bottom edge is cut to follow the grade, or a sloped-track slide gate that tracks along the driveway’s angle. This is a site-assessment step that catches first-time installers off guard every time. We’ll measure your grade before we ever quote a gate.
Yes, in almost all cases we can repair a sagging 1920s ornamental iron gate without replacing it. Sagging on old iron gates usually comes from three sources: worn hinge pins and hinge bushings, a hinge post that has shifted out of plumb, or rust-weakened lower rail joints. We replace the hinge pins, re-set the post if needed, and weld or reinforce the compromised rail sections to restore the gate’s original geometry. For period ironwork on Spanish Colonial Revival and Mediterranean homes in Los Feliz Estates and along Los Feliz Boulevard, we fabricate period-accurate replacement sections when a specific element is beyond repair. We’d rather restore your original gate than hang an off-the-shelf aluminum replacement that doesn’t match the house.
Under current UL 325 and ASTM F2200 standards, your automatic gate needs entrapment protection devices on both the open and close directions: photoelectric sensors or contact edges, or a combination, that will stop and reverse the gate if a person, vehicle, or object is in the path. On raked gates and sloped-track slide gates, which are common in Los Feliz Hills, the sensor placement has to be recalibrated for the gate’s angle so there are no blind spots. We configure and test the full entrapment protection system to manufacturer spec on every automatic gate repair. If you’re not sure whether your gate meets current standards, call us for a safety check and we’ll tell you exactly what’s needed and what it costs before any work begins.
Get Your Los Feliz Gate Working Right Again
If your gate is sagging, binding, stuck open, or dead after the last wind, call (925) 693-7978. A live person answers, 24 hours a day, 7 days a week. We’ll give you a straight answer about what’s wrong, an upfront price range, and a written price before any work starts. Free estimates, done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Feliz and the surrounding communities.